AMPC-C_DE

REAMING | ALVAN® Reaming Systems by S.C.A.M.I.

Lead-in Angle InformaƟon

Straight Flute

A

Lead-in

Angles

Chip EvacuaƟon

DescripƟon

Lead-in can be used to improve finish.

DRILLING

A

45°

8°

Can be used for stock removal at the boƩom of the hole. Reduce the feed by 40% of the values on the recommended cuƫng data pages.

F

90°

Straight

Standard and suitable for most materials.

G

45°

B

May provide improved straightness. Reduce the feed by 40% of the values on the recommended cuƫng data pages.

L

75°

BORING

Ideal for through holes. It is possible to increase the feed up to 100% of the values on the recommended cuƫng data pages.

N T V K

20°

Suitable for Ɵtanium based alloys.

30°

C

Suitable for most materials and increases tool life.

REAMING

45°

Excellent at breaking small chips that are easy to evacuate in blind hole applicaƟons. Requires 50% increased feed rate, which will result in reduced tool life when compared to other leads.

80°

0.10x45°

Helical Flute (Right-Hand) - Blind Hole Applications Only

D

Lead-in

Angles

Chip EvacuaƟon

DescripƟon

Standard and suitable for most materials.

E

BURNISHING

25°

May provide beƩer penetraƟon rates in steels over 200 BHN.

M

Helical

45°

Excellent at breaking small chips that are easy to evacuate in blind hole applicaƟons. Requires 50% increased feed rate, which will result in reduced tool life when compared to other leads.

K

80°

0.10x45°

E

THREADING

Helical Flute (LeŌ-Hand) - Through Hole Applications Only

Lead-in

Angles

Chip EvacuaƟon

DescripƟon

Standard and suitable for most materials.

E

NOTE: Through hole applicaƟons only.

25°

May provide beƩer penetraƟon rates in steels over 200 BHN.

Helical

M

45°

NOTE: Through hole applicaƟons only.

X

SPECIALS

C: 8

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com