A55-4TX_US-EN

DRILLING | 4TEX® Drill: Indexable Carbide Insert Drilling System

EDGES 4 Insert Information

A

CUTTING

DRILLING

Periphery Edge

Center Edge

Center Edge

• Each insert has two inner cutting edges and two outer cutting edges • Economical solution that increases tool life because of the rotation ability of the inserts • Available in ISO material-specific geometry/coating combinations

B

Periphery Edge

BORING

Periphery Insert

Center Insert

180°

C

REAMING

Periphery edge chip formation:

Center edge chip formation:

D

BURNISHING

ISO Material

Geometry

Coating

Description

A general purpose geometry that provides excellent chip formation in most steels including free-machining, medium- and high-carbon steels. A P30 carbide substrate for improved toughness and AM480 coating, a proprietary wear resistant multilayer PVD coating to improve tool life. A higher rake geometry that provides excellent chip formation in both stainless steels and high-temperature alloys. A tough M25 carbide substrate coated with AM485, a high heat resistance proprietary multilayer PVD coating. A lower rake geometry to improve edge strength in both hardened tool steels and high strength alloys. With a P30 carbide substrate for improved toughness and coated with AM480, a proprietary multilayer PVD coating to improve resistance against tool wear. With a general purpose geometry, the K inserts can be used in grey cast irons as well as ductile irons. A high wear-resistant K10 carbide substrate to improve tool life and coated with AM480, a proprietary multilayer PVD coating to improve resistance against tool wear. A higher rake cutting geometry provides excellent chip formation in nonferrous materials. An M15/K15 carbide substrate paired with TiCN coating for improved lubricity to resist built-up material, increasing tool life and maintaining chip formation.

P

E

General Rake

AM480

THREADING

S M

High Rake

AM485

H

Low Rake

AM480

X

K

General Rake

AM480

SPECIALS

N

High Rake

TiCN

www.alliedmachine.com | 1.330.343.4283

A55: 5

Made with FlippingBook Online newsletter