Drilling Product Catalog

DRILLING | GEN3SYS® XT Pro and XT High Penetration Replaceable Insert Drilling System

Case Studies

TEST RESULTS Competitive Test

Average Tool Life Test Results Drilling in 4150 Steel

Project Profile: Competitive Testing in 4150 Steel Tooling Solution: GEN3SYS XT Pro: (P) steel geometry A20

The Parameters: • Hole Diameter = 19 mm (0.748") • Depth of Cut = 38.1 mm (1-1/2") • Coolant = 300 PSI • Speed = 1583 RPM • Feed = 563 mm/min (22.16 IPM)

100.00 112.50

107.29

Average Life (Linear meters) 12.50 25.00 37.50 50.00 62.50 75.00 87.50 62.94

84.25

The Results: When run at the listed parameters, here is how the three different tooling solutions performed: Competitor 1 = 2478 total linear inches Competitor 2 = 3317 total linear inches GEN3SYS XT Pro = 4224 total linear inches

Compe tor 1 Compe tor 2 XT Pro

Drilling Tool

A20: 5

www.alliedmachine.com | 1.330.343.4283