Drilling Product Catalog

DRILLING | T-A® Replaceable Insert Drilling System

0 Series: 12.98 mm - 17.67 mm (0.5110" - 0.6959")

T-A® Drill Holders

Imperial Taper Shank Holders

Body

Shank

L 2

L 4

L 3

L 1

MT

P 2

Flute

Series

Length

RCA

Part No.

A30

22000S-002I 24000S-002I 25000S-002I 22005S-002I 24005S-002I 25005S-002I 24000H-002I 25000H-002I 26000H-002I 24005H-002I 25005H-002I

Short

1.213 2.188 3.638 6.469 #2 MT

1/16 NPT 2T-2SR 1/16 NPT 2T-2SR 1/16 NPT 2T-2SR 1/16 NPT 2T-2SR 1/16 NPT 2T-2SR 1/16 NPT 2T-2SR 1/16 NPT 2T-2SR 1/16 NPT 2T-2SR 1/16 NPT 2T-2SR 1/16 NPT 2T-2SR 1/16 NPT 2T-2SR 1/16 NPT 2T-2SR

Standard 2.338 3.313 4.763 7.594 #2 MT

0

Extended

4.338 5.313 6.763 9.594 #2 MT 1.188 2.188 3.638 6.469 #2 MT

Short

Straight

Standard 2.313 3.313 4.763 7.594 #2 MT

0.5

Extended

4.313 5.313 6.763 9.594 #2 MT

Standard 2.909 3.313 4.763 7.594 #2 MT 4.909 5.313 6.763 9.594 #2 MT 7.409 7.813 9.263 12.094 #2 MT 4.956 5.313 6.763 9.594 #2 MT 7.456 7.813 9.263 12.094 #2 MT Standard 2.956 3.313 4.763 7.594 #2 MT Extended Long Extended

0

Helical

0.5

Long 26005H-002I NOTE : 0.5 series inserts fit into both 0 and 0.5 series holders. However, 0 series inserts ONLY fit into 0 series holders. See page A30: 7 for visual .

Connection Accessories

Admissible Tightening Torque* 175 N-cm (15.5 in-lbs) 175 N-cm (15.5 in-lbs)

Nylon Locking Screws 72556N-IP8-1 72567N-IP8-1

Preset Torque Hand Driver

Series

Insert Screws 72556-IP8-1 72567-IP8-1

Insert Driver

Replacement Tips

0

8IP-8 8IP-8

8IP-8TL 8IP-8TL

8IP-8B 8IP-8B

0.5

*Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength.

Refer to Speed and Feed charts for recommended adjustments to speeds and feeds. Refer to page A30: 146 for deep hole drilling guidelines in this section of the catalog. Visit www.alliedmachine.com/DeepHoleGuidelines for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our Application Engineering department : appeng@alliedmachine.com. WARNING

A30: 113 - 139

A30: 33 - 39

A30: 46 & 111 A30: 46 & 112

Key on A30: 2

Screws sold in multiples of 10. = Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

A30: 44