Drilling Product Catalog

DRILLING | T-A® Replaceable Insert Drilling System

T-A® Drill Inserts 2 Series: 24.41 mm - 35.06 mm (0.9610" - 1.3809")

Cast Iron Geometry

A30

Cast Iron Geometry Carbide: K10 (C3)

Insert

Carbide: N2

Part No.

Part No.

Fractional Equivalent

D 1 mm

D 1 inch 1.1875 1.2008 1.2188 1.2205 1.2260 1.2310 1.2344 1.2402 1.2500 1.2598 1.2795 1.2813 1.2992 1.3125 1.3189 1.3386 1.3438 1.3583 1.3750 1.3780

Series

Diamond Film* 1N22D-0106 1N22D-30.5 1N22D-0107 1N22D-31 1N22D-1.226 1N22D-1.231 1N22D-1.234 1N22D-31.5 1N22D-0108 1N22D-32 1N22D-32.5 1N22D-0109 1N22D-33 1N22D-0110 1N22D-33.5 1N22D-34 1N22D-0111 1N22D-34.5 1N22D-0112 1N22D-35

TiAlN

1C32A-0106-CI 1C32A-30.5-CI 1C32A-0107-CI 1C32A-31-CI 1C32A-1.226-CI 1C32A-1.231-CI 1C32A-1.234-CI 1C32A-31.5-CI 1C32A-0108-CI 1C32A-32-CI 1C32A-32.5-CI 1C32A-0109-CI 1C32A-33-CI 1C32A-0110-CI 1C32A-33.5-CI 1C32A-34-CI 1C32A-0111-CI 1C32A-34.5-CI 1C32A-0112-CI

30.16 30.50 30.96 31.00 31.14 31.27 31.35 31.50 31.75 32.00 32.50 32.55 33.00 33.34 33.50 34.00 34.13 34.50 34.93 35.00

1-3/16

—

1-7/32

— — —

1-15/64

—

1-1/4

— —

2.5

1-9/32

—

1-5/16

— —

1-11/32

—

1-3/8

— 1C32A-35-CI * Diamond film coated items are nonstocked standard and only available in standard geometry. For additional geometries, please contact Application Engineering. Process fees apply. NOTE: 2.5 series inserts fit into both 2 and 2.5 series holders. However, 2 series inserts ONLY fit into 2 series holders. See page A30: 7 for visual .

A30: 113 - 139

A30: 73 - 77

A30: 5 - 6

Coatings not listed above can be supplied as nonstocked standards. Process fees apply. Inserts sold in quantities of 2.

Key on A30: 2

HI, HR, CR, TC, SK, NP, IN, RN, CN, AN, BR, CI, CP, NC, WC, BT

www.alliedmachine.com | 1.330.343.4283

A30: 68