Drilling Product Catalog

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

38 Series: 38.00 mm - 43.99 mm (1.4959" - 1.7320")

Heads

T-A® Style Head

GEN3SYS® Style Head

APX Heads

T-A Style Head

GEN3SYS Style Head

D 1

D 3

L 9

L 9

IC Insert Size mm inch 9.53 3/8 9.53 3/8 9.53 3/8 9.53 3/8 9.53 3/8 9.53 3/8 9.53 3/8 9.53 3/8 9.53 3/8 9.53 3/8 9.53 3/8 9.53 3/8 9.53 3/8 9.53 3/8

mm inch

Fractional

mm inch mm inch

Part No.

mm inch 4.9 0.195 4.9 0.195 4.9 0.195 4.9 0.195 4.9 0.195 5.2 0.205 5.2 0.205 5.2 0.205 5.2 0.205 5.5 0.216 5.5 0.216 5.5 0.216 5.8 0.227 5.8 0.227

Part No.

V3800D-38 V3800D-0116 V3800D-0117 V3800D-39 V3800D-0118 V3800D-40 V3800D-0119 V3800D-41 V3800D-0120 V3801D-42 V3801D-0121 V3801D-0122 V3801D-43 V3801D-0123

V3815D-38 V3815D-0116 V3815D-0117 V3815D-39 V3815D-0118 V3817D-40 V3817D-0119 V3817D-41 V3817D-0120 V3818D-42 V3818D-0121 V3818D-0122 V3820D-43 V3820D-0123

38.00 1.4961 — 15.88 5/8 5.7 0.226 38.10 1.5000 1-1/2 15.88 5/8 5.7 0.226 38.90 1.5313 1-17/32 15.88 5/8 5.7 0.226 39.00 1.5354 — 15.88 5/8 5.7 0.226 39.69 1.5625 1-9/16 15.88 5/8 5.7 0.226 40.00 1.5748 — 17.46 11/16 6.1 0.240 40.48 1.5938 1-19/32 17.46 11/16 6.1 0.240 41.00 1.6142 — 17.46 11/16 6.1 0.240 41.28 1.6250 1-5/8 17.46 11/16 6.1 0.240 42.00 1.6535 — 19.05 3/4 6.5 0.254 42.07 1.6563 1-21/32 19.05 3/4 6.5 0.254 42.86 1.6875 1-11/16 19.05 3/4 6.5 0.254 43.00 1.6929 — 20.64 13/16 6.8 0.268 43.66 1.7188 1-23/32 20.64 13/16 6.8 0.268

A50

Pilot Inserts

D 1 Range

D 3

T-A Style Head

GEN3SYS Style Head

mm

inch

mm inch Pilot Series

T-A Pro®

T-A (-TC)

Pilot Series

XT Pro

TA#0-15.50 1C10H-0020-TC TA#0-17.46 1C10H-0022-TC TA#1-19.05 1C11H-0024-TC TA#1-20.64 1C11H-0026-TC

XT#15-15.88 XT#17-17.46 XT#18-19.05

38.00 - 39.72 1.4959 - 1.5639 15.88

5/8

0 0 1 1

15 17 18 20

39.73 - 41.30 1.5640 - 1.6261 17.46 11/16

41.31 - 42.90 1.6262 - 1.6891 19.05

3/4

42.91 - 43.99 1.6892 - 1.7320 20.64 13/16 XT#20-20.64 #: Denotes ISO material/geometry (P= steel, M= stainless steel, K= cast iron, N= nonferrous, and X= high-speed steel substrate). Please note, X is only available in T-A Pro inserts. IC Inserts - AM300® Coated Size Geometry Part No. Insert Screw Insert Driver Admissible Tightening Torque* mm inch

K35 (C1)

P35 (C5)

K25 (C2)

OP-060408-1PW OP-060408-PW OP-060408-2PW

Standard High Rake

465 N-cm (41.0 in-lbs)

9.53 3/8

73595-IP15-1 8IP-15

— OP-060408-PWHR — *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength.

Pilot Accessories T-A Series

GEN3SYS Series

Insert Screws 7247-IP7-1 72567-IP8-1 7375-IP9-1

Insert Driver

Admissible Tightening Torque*

—

15 17 18

8IP-7 8IP-8 8IP-9

84 N-cm (7.4 in-lbs) 175 N-cm (15.5 in-lbs) 305 N-cm (27.0 in-lbs)

0 1

20 *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength.

NOTE: For standard metric sized pilot inserts, please see the cross reference on pg. A50: 33 .

IC inserts sold in multiples of 2. Insert screws sold in multiples of 10.

A50: 29 - 32

A25 & A30

A20

Key on A50: 2

For nonstocked diameters, follow the below examples: Metric 38 series, T-A (0 series), 41.25 mm

= V3800D-41.25 = V3817D-1.6200

Inch

38 series, GEN3 (17 series), 1.6200"

A50: 9

www.alliedmachine.com | 1.330.343.4283