Drilling Product Catalog

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

38 Series: 38.00 mm - 43.99 mm (1.4959" - 1.7320")

Holders

Straight Shank

Body

Shank

L 2

L 3

L 1

L 5

D 2 40 40 40 40 50 50 50 50

P 1

Length

Part No.

W3803H-40FM W3805H-40FM W3808H-40FM W3810H-40FM W3803H-50FM W3805H-50FM W3808H-50FM W3810H-50FM W3803H-150F W3805H-150F W3808H-150F W3810H-150F W3803H-200F W3805H-200F W3808H-200F W3810H-200F

3xD 5xD 8xD 3xD 5xD 8xD 3xD 5xD 8xD 3xD 5xD 8xD

149.3 237.3 369.3 457.3 149.3 237.3 369.3 457.3 5.878 9.342

195.7 283.7 415.7 503.7 195.7 283.7 415.7 503.7 7.704

265.7 353.7 485.7 573.7 275.7 363.7 495.7 583.7

70.0 70.0 70.0 70.0 80.0 80.0 80.0 80.0

1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT

10xD

10xD

10.392 13.856 19.053 22.517 12.204 15.668 20.865 24.329

2.688 2.688 2.688 2.688 4.500 4.500 4.500 4.500

1-1/2 1-1/2 1-1/2 1-1/2

A50

11.168 16.365 19.829 7.704 11.168 16.365 19.829

14.539 18.003 5.878 9.342 14.539 18.003

10xD

2 2 2 2

10xD

CAT Integral Shank

Body

L 2

L 9

Length

Shank CAT40 CAT40 CAT40 CAT40 CAT50 CAT50 CAT50 CAT50

Part No.

W3803H-CV40 W3805H-CV40 W3808H-CV40 W3810H-CV40 W3803H-CV50 W3805H-CV50 W3808H-CV50 W3810H-CV50

3xD 5xD 8xD 3xD 5xD 8xD 10xD 10xD

5.878 9.342 14.539 18.003 5.878 9.342 14.539 18.003

8.304 11.768 16.965 20.429 8.304 11.768 16.965 20.429

Connection Accessories

Mounting Screw

Mounting Screw Driver

Admissible Tightening Torque*

75020-IP20-1 678 N-cm (60 in-lb) *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength. 8IP-20

Refer to Speed and Feed charts for recommended adjustments to speeds and feeds and page A50: 34 for deep hole drilling guidelines in this section of the catalog. Visit www.alliedmachine.com/DeepHoleGuidelines for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our Application Engineering department : appeng@alliedmachine.com. WARNING

Mounting screws sold in multiples of 4. = Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

A50: 10