Drilling Product Catalog

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

51 Series: 51.00 mm - 56.99 mm (2.0077" - 2.2438")

Holders

Straight Shank

Body

Shank

L 2

L 3

L 1

L 5

D 2 50 50 50 50

P 1

Length

Part No.

W5103H-50FM W5105H-50FM W5108H-50FM W5110H-50FM W5103H-200F W5105H-200F W5108H-200F W5110H-200F

3xD 5xD 8xD 3xD 5xD 8xD 10xD 10xD

180.3 294.2 465.2 579.2 7.097

225.6 339.5 510.5 624.5 8.880

305.6 419.6 590.6 704.5

80.0 80.0 80.0 80.0

1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT

13.380 17.868 24.600 29.088

4.500 4.500 4.500 4.500

2 2 2 2

11.585 18.317 22.805

13.368 20.100 24.588

A50

CAT Integral Shank

Body

L 2

L 9

Length

Shank CAT50 CAT50 CAT50 CAT50

Part No.

W5103H-CV50 W5105H-CV50 W5108H-CV50 W5110H-CV50

3xD 5xD 8xD

7.097 11.585 18.317 22.805

9.732 14.220 20.952 25.440

10xD

Connection Accessories

Mounting Screw

Mounting Screw Driver

Admissible Tightening Torque*

75020-IP20-1 678 N-cm (60 in-lb) *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength. 8IP-20

Refer to Speed and Feed charts for recommended adjustments to speeds and feeds and page A50: 34 for deep hole drilling guidelines in this section of the catalog. Visit www.alliedmachine.com/DeepHoleGuidelines for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our Application Engineering department : appeng@alliedmachine.com. WARNING

Mounting screws sold in multiples of 4. = Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

A50: 14