Drilling Product Catalog

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

57 Series: 57.00 mm - 62.99 mm (2.2439" - 2.4801")

Heads

T-A® Style Head

GEN3SYS® Style Head

APX Heads

T-A Style Head

GEN3SYS Style Head

D 1

D 3

L 9

L 9

IC Insert Size mm inch 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16

mm inch

Fractional

mm inch mm inch

Part No.

mm inch 6.7 0.263 6.7 0.263 6.7 0.263 6.7 0.263 6.7 0.263 6.8 0.269 6.8 0.269 6.8 0.269 6.8 0.269 7.1 0.280 7.1 0.280 7.1 0.280 7.4 0.290 7.4 0.290

Part No.

V5701D-57 V5701D-0208 V5701D-0209 V5701D-58 V5701D-0210 V5701D-59 V5701D-0211 V5701D-60 V5701D-0212 V5702D-61 V5702D-0213 V5702D-0214 V5702D-62 V5702D-0215

V5722D-57 V5722D-0208 V5722D-0209 V5722D-58 V5722D-0210 V5722D-59 V5722D-0211 V5722D-60 V5722D-0212 V5724D-61 V5724D-0213 V5724D-0214 V5726D-62 V5726D-0215

57.00 2.2441 — 23.02 29/32 7.9 0.309 57.15 2.2500 2-1/4 23.02 29/32 7.9 0.309 57.95 2.2813 2-9/32 23.02 29/32 7.9 0.309 58.00 2.2835 — 23.02 29/32 7.9 0.309 58.74 2.3125 2-5/16 23.02 29/32 7.9 0.309 59.00 2.3228 — 23.81 15/16 8.0 0.316 59.53 2.3438 2-11/32 23.81 15/16 8.0 0.316 60.00 2.3622 — 23.81 15/16 8.0 0.316 60.33 2.3750 2-3/8 23.81 15/16 8.0 0.316

A50

61.00 2.4016 — 25.40 1 61.12 2.4063 2-13/32 25.40 1 61.91 2.4375 2-7/16 25.40 1

8.4 0.330 8.4 0.330 8.4 0.330

62.00 2.4409 — 26.99 1-1/16 8.7 0.344 62.71 2.4688 2-15/32 26.99 1-1/16 8.7 0.344

Pilot Inserts

D 1 Range

D 3

T-A Style Head

GEN3SYS Style Head

mm

inch

mm inch Pilot Series

T-A Pro®

T-A (-TC)

Pilot Series

XT Pro

TA#1-23.02 1C11H-0029-TC TA#1-23.81 1C11H-0030-TC TA#2-25.40 1C12H-0100-TC TA#2-26.99 1C12H-0102-TC

XT#22-23.02 XT#22-23.81 XT#24-25.40

57.00 - 58.77 2.2439 - 2.3139 23.02 29/32 58.78 - 60.35 2.3140 - 2.3761 23.81 15/16

1 1 2 2

22 22 24 26

60.36 - 61.95 2.3762 - 2.4391 25.40

1

61.96 - 62.99 2.4392 - 2.4801 26.99 1-1/16 XT#26-26.99 #: Denotes ISO material/geometry (P= steel, M= stainless steel, K= cast iron, N= nonferrous, and X= high-speed steel substrate). X is only

available in T-A Pro inserts. IC Inserts - AM300® Coated Size Geometry mm inch

Part No. P35 (C5)

Insert Driver

Admissible Tightening Torque*

Insert Screw

K35 (C1)

K25 (C2)

OP-090608-1PW OP-090608-PW OP-090608-2PW

Standard High Rake

1370 N-cm (121.0 in-lbs)

14.29 9/16

75014-IP20-1 8IP-20

— OP-090608-PWHR — *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength. Pilot Accessories T-A Series GEN3SYS Series Insert Screws Insert Driver

Admissible Tightening Torque*

22 24 26

1 2

739-IP9-1

8IP-9

305 N-cm (27.0 in-lbs) 690 N-cm (61.0 in-lbs)

7495-IP15-1

8IP-15

*Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength.

NOTE: For standard metric sized pilot inserts, please see the cross reference on pg. A50: 33 .

IC inserts sold in multiples of 2. Insert screws sold in multiples of 10.

A50: 29 - 32

A25 & A30

A20

Key on A50: 2

For nonstocked diameters, follow the below examples: Metric 57 series, T-A (1 series), 60.25 mm

= V5701D-60.25 = V5722D-2.3450

Inch

57 series, GEN3 (22 series), 2.3450"

A50: 15

www.alliedmachine.com | 1.330.343.4283