Drilling Product Catalog

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

57 Series: 57.00 mm - 62.99 mm (2.2439" - 2.4801")

Holders

Straight Shank

Body

Shank

L 2

L 3

L 1

L 5

D 2 50 50 50 50

P 1

Length

Part No.

W5703H-50FM W5705H-50FM W5708H-50FM W5710H-50FM W5703H-200F W5705H-200F W5708H-200F W5710H-200F

3xD 5xD 8xD 3xD 5xD 8xD 10xD 10xD

197.4 323.4 512.4 638.4 7.772

242.7 368.7 557.7 683.7 9.556

322.7 448.7 637.7 763.7

80.0 80.0 80.0 80.0

1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT

14.056 19.016 26.457 31.417

4.500 4.500 4.500 4.500

2 2 2 2

12.732 20.173 25.133

14.516 21.957 26.917

A50

CAT Integral Shank

Body

L 2

L 9

Length

Shank CAT50 CAT50 CAT50 CAT50

Part No.

W5703H-CV50 W5705H-CV50 W5708H-CV50 W5710H-CV50

3xD 5xD 8xD

7.772 12.732 20.173 25.133

10.528 15.489 22.929 27.890

10xD

Connection Accessories

Mounting Screw

Mounting Screw Driver

Admissible Tightening Torque*

75020-IP20-1 678 N-cm (60 in-lb) *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength. 8IP-20

Refer to Speed and Feed charts for recommended adjustments to speeds and feeds and page A50: 34 for deep hole drilling guidelines in this section of the catalog. Visit www.alliedmachine.com/DeepHoleGuidelines for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our Application Engineering department : appeng@alliedmachine.com. WARNING

Mounting screws sold in multiples of 4. = Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

A50: 16