Drilling Product Catalog

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

63 Series: 63.00 mm - 69.99 mm (2.4802" - 2.7557")

Heads

T-A® Style Head

GEN3SYS® Style Head

APX Heads

T-A Style Head

GEN3SYS Style Head

D 1

D 3

L 9

L 9

IC Insert Size mm inch 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16 14.29 9/16

mm inch

Fractional

mm inch mm inch

Part No.

mm inch 7.6 0.301 7.6 0.301 7.6 0.301 7.6 0.301 7.6 0.301 7.9 0.312 7.9 0.312 7.9 0.312 7.9 0.312 8.2 0.323 8.2 0.323 8.2 0.323 8.2 0.323 8.5 0.333 8.5 0.333 8.5 0.333

Part No.

V6302D-63 V6302D-0216 V6302D-64 V6302D-0217 V6302D-65 V6302D-0218 V6302D-0219 V6302D-66 V6302D-0220 V6302D-67 V6302D-0221 V6302D-68 V6302D-0222 V6302D-69 V6302D-0223 V6302D-0224

V6326D-63 V6326D-0216 V6326D-64 V6326D-0217 V6326D-65 V6329D-0218 V6329D-0219 V6329D-66 V6329D-0220 V6329D-67 V6329D-0221 V6329D-68 V6329D-0222 V6332D-69 V6332D-0223 V6332D-0224

63.00 2.4803 — 28.58 1-1/8 9.1 0.358 63.50 2.5000 2-1/2 28.58 1-1/8 9.1 0.358 64.00 2.5197 — 28.58 1-1/8 9.1 0.358 64.30 2.5313 2-17/32 28.58 1-1/8 9.1 0.358 65.00 2.5591 — 28.58 1-1/8 9.1 0.358 65.09 2.5625 2-9/16 30.16 1-3/16 9.4 0.372 65.88 2.5938 2-19/32 30.16 1-3/16 9.4 0.372 66.00 2.5984 — 30.16 1-3/16 9.4 0.372 66.68 2.6250 2-5/8 30.16 1-3/16 9.4 0.372 67.00 2.6378 — 31.75 1-1/4 9.8 0.386 67.47 2.6563 2-21/32 31.75 1-1/4 9.8 0.386 68.00 2.6772 — 31.75 1-1/4 9.8 0.386 68.26 2.6875 2-11/16 31.75 1-1/4 9.8 0.386 69.00 2.7165 — 33.34 1-5/16 10.1 0.400 69.06 2.7188 2-23/32 33.34 1-5/16 10.1 0.400 69.85 2.7500 2-3/4 33.34 1-5/16 10.1 0.400

A50

Pilot Inserts

D 1 Range

D 3

T-A Style Head

GEN3SYS Style Head

mm

inch

mm inch Pilot Series

T-A Pro®

T-A (-TC)

Pilot Series

XT Pro

TA#2-28.58 1C12H-0104-TC TA#2-30.16 1C12H-0106-TC TA#2-31.75 1C12H-0108-TC TA#2-33.34 1C12H-0110-TC

XT#26-28.58 XT#29-30.16 XT#29-31.75

63.00 - 65.07 2.4802 - 2.5620 28.58

1-1/8

2 2 2 2

26 29 29 32

65.08 - 66.70 2.5621 - 2.6261 30.16 1-3/16

66.71 - 68.30 2.6262 - 2.6891 31.75

1-1/4

68.31 - 69.99 2.6892 - 2.7557 33.34 1-5/16 XT#32-33.34 #: Denotes ISO material/geometry (P= steel, M= stainless steel, K= cast iron, N= nonferrous, and X= high-speed steel substrate). X is only

available in T-A Pro inserts. IC Inserts - AM300® Coated Size Geometry mm inch

Part No. P35 (C5)

Insert Driver

Admissible Tightening Torque*

Insert Screw

K35 (C1)

K25 (C2)

OP-090608-1PW OP-090608-PW OP-090608-2PW

Standard High Rake

1370 N-cm (121.0 in-lbs)

14.29 9/16

75014-IP20-1 8IP-20

— OP-090608-PWHR — *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength. Pilot Accessories T-A Series GEN3SYS Series Insert Screws Insert Driver 29 32 *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength. 2 26 7495-IP15-1 8IP-15

Admissible Tightening Torque*

690 N-cm (61.0 in-lbs)

NOTE: For standard metric sized pilot inserts, please see the cross reference on pg. A50: 33 .

IC inserts sold in multiples of 2. Insert screws sold in multiples of 10.

A50: 29 - 32

A25 & A30

A20

Key on A50: 2

For nonstocked diameters, follow the below examples: Metric 63 series, T-A (2 series), 66.25 mm

= V6302D-66.25 = V6329D-2.5450

Inch

63 series, GEN3 (29 series), 2.5450"

A50: 17

www.alliedmachine.com | 1.330.343.4283