Drilling Product Catalog

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

70 Series: 70.00 mm - 75.99 mm (2.7558" - 2.9919")

Holders

Straight Shank

Body

Shank

L 2

L 3

L 1

L 5

D 2 50 50 50 50

P 1

Length

Part No.

W7003H-50FM W7005H-50FM W7008H-50FM W7010H-50FM W7003H-200F W7005H-200F W7008H-200F W7010H-200F

3xD 5xD 8xD 3xD 5xD 8xD 10xD 10xD

235.1 387.1 615.1 716.5 9.258

269.1 421.1 649.1 750.4

349.1 501.1 729.1 830.4

80.0 80.0 80.0 80.0

1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT

10.594 16.578 25.554 29.543

15.094 21.078 30.054 34.043

4.500 4.500 4.500 4.500

2 2 2 2

15.242 24.218 28.207

A50

CAT Integral Shank

Body

L 2

L 9

Length

Shank CAT50 CAT50 CAT50 CAT50

Part No.

W7003H-CV50 W7005H-CV50 W7008H-CV50 W7010H-CV50

3xD 5xD 8xD

9.258 15.242 24.218 27.080

12.219 18.203 27.179 29.948

10xD

Connection Accessories

Mounting Screw

Mounting Screw Driver

Admissible Tightening Torque*

78027-IP30-1 2825 N-cm (250 in-lb) *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength. 8IP-30B

Refer to Speed and Feed charts for recommended adjustments to speeds and feeds and page A50: 34 for deep hole drilling guidelines in this section of the catalog. Visit www.alliedmachine.com/DeepHoleGuidelines for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our Application Engineering department : appeng@alliedmachine.com. WARNING

Mounting screws sold in multiples of 4. = Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

A50: 20