Drilling Product Catalog

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

76 Series: 76.00 mm - 82.99 mm (2.9920" - 3.2675")

Holders

Straight Shank

Body

Shank

L 2

L 3

L 1

L 5

D 2 50 50 50 50

P 1

Length

Part No.

W7603H-50FM W7605H-50FM W7608H-50FM W7610H-50FM W7603H-200F W7605H-200F W7608H-200F W7610H-200F

3xD 5xD 8xD 3xD 5xD 8xD 10xD 10xD

255.8 421.8 670.7 836.7

292.4 458.4 707.4 873.4

372.4 538.4 787.4 953.4

80.0 80.0 80.0 80.0

1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT

10.070 16.605 26.407 32.942

11.513 18.048 27.850 34.385

16.013 22.548 32.350 38.885

4.500 4.500 4.500 4.500

2 2 2 2

A50

CAT Integral Shank

Body

L 2

L 9

Length

Shank CAT50 CAT50 CAT50 CAT50

Part No.

W7603H-CV50 W7605H-CV50 W7608H-CV50 W7610H-CV50

3xD 5xD 8xD

10.070 16.605 26.407 32.942

12.888 19.422 29.225 35.760

10xD

Connection Accessories

Mounting Screw

Mounting Screw Driver

Admissible Tightening Torque*

78027-IP30-1 2825 N-cm (250 in-lb) *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength. 8IP-30B

Refer to Speed and Feed charts for recommended adjustments to speeds and feeds and page A50: 34 for deep hole drilling guidelines in this section of the catalog. Visit www.alliedmachine.com/DeepHoleGuidelines for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our Application Engineering department : appeng@alliedmachine.com. WARNING

Mounting screws sold in multiples of 4. = Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

A50: 22