Drilling Product Catalog

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

83 Series: 83.00 mm - 88.99 mm (3.2676" - 3.5037")

Heads

T-A® Style Head

GEN3SYS® Style Head

APX Heads

T-A Style Head

GEN3SYS Style Head

D 1

D 3

L 9

L 9

IC Insert Size mm inch 12.70 1/2 12.70 1/2 12.70 1/2 12.70 1/2 12.70 1/2 12.70 1/2 12.70 1/2

mm inch

Fractional

mm inch mm inch

Part No.

mm inch 8.6 0.338 8.6 0.338 8.6 0.338 8.6 0.338 8.6 0.338 8.6 0.338 8.6 0.338

Part No.

V8302S-84 V8302S-0310 V8302S-0312 V8302S-86 V8302S-0314 V8302S-88 V8302S-0316

V8332S-84 V8332S-0310 V8332S-0312 V8332S-86 V8332S-0314 V8332S-88 V8332S-0316

84.00 3.3071 — 34.93 1-3/8 10.4 0.408 84.14 3.3125 3-5/16 34.93 1-3/8 10.4 0.408 85.73 3.3750 3-3/8 34.93 1-3/8 10.4 0.408 86.00 3.3858 — 34.93 1-3/8 10.4 0.408 87.31 3.4375 3-7/16 34.93 1-3/8 10.4 0.408 88.00 3.4646 — 34.93 1-3/8 10.4 0.408 88.90 3.5000 3-1/2 34.93 1-3/8 10.4 0.408

Pilot Inserts

A50

D 1 Range

D 3

T-A Style Head

GEN3SYS Style Head

mm

inch

mm inch Pilot Series

T-A Pro®

T-A (-TC)

Pilot Series

XT Pro

83.00 - 88.99 3.2676 - 3.5037 34.93 XT#32-34.93 #: Denotes ISO material/geometry (P= steel, M= stainless steel, K= cast iron, N= nonferrous, and X= high-speed steel substrate). X is only available in T-A Pro inserts. 1-3/8 2 TA#2-34.93 1C12H-0112-TC 32

IC Inserts - AM300® Coated Size Geometry mm inch

Part No. P35 (C5)

Insert Driver

Admissible Tightening Torque*

Insert Screw

K35 (C1)

K25 (C2)

OP-080508-1PW OP-080508-PW OP-080508-2PW

Standard High Rake

690 N-cm (61.0 in-lbs)

12.70 1/2

74012-IP15-1 8IP-15

— OP-080508-PWHR — *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength.

Pilot Accessories T-A Series

GEN3SYS Series

Insert Screws 7495-IP15-1

Insert Driver

Admissible Tightening Torque*

2

32

8IP-15

690 N-cm (61.0 in-lbs)

*Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength.

Wear pads sold in multiples of 2. Wear pad screws sold in multiples of 4. IC inserts sold in multiples of 2. Insert screws sold in multiples of 10.

NOTE: For standard metric sized pilot inserts, please see the cross reference on pg. A50: 33 .

A50: 29 - 32

A25 & A30

A20

Key on A50: 2

For nonstocked diameters, follow the below examples: Metric 83 series, T-A (2 series), 86.25 mm

= V8302S-86.25 = V8332S-3.3250

Inch

83 series, GEN3 (32 series), 3.3250"

A50: 23

www.alliedmachine.com | 1.330.343.4283