Drilling Product Catalog

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

95 Series: 95.00 mm - 101.60 mm (3.7400" - 4.0001")

Holders

Straight Shank

Body

Shank

L 2

L 3

L 1

L 5

D 2 50 50 50 50

P 1

Length

Part No.

W9503H-50FM W9505H-50FM W9508H-50FM W9510H-50FM W9503H-200F W9505H-200F W9508H-200F W9510H-200F

3xD 5xD 8xD 3xD 5xD 8xD 10xD 10xD

316.9 520.1 712.0 916.3

362.8 566.0 756.7 962.3

442.8 646.0 836.7

80.0 80.0 80.0 80.0

1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT

1042.3 18.785 26.785 34.290 42.385

12.477 20.477 27.982 36.077

14.285 22.285 29.790 37.885

4.500 4.500 4.500 4.500

2 2 2 2

A50

CAT Integral Shank

Body

L 2

L 9

Length

Shank CAT50 CAT50 CAT50 CAT50

Part No.

W9503H-CV50 W9505H-CV50 W9508H-CV50 W9510H-CV50

3xD 5xD 8xD

12.477 20.477 27.102 36.077

15.660 23.660 30.285 39.260

10xD

Connection Accessories

Mounting Screw

Mounting Screw Driver

Admissible Tightening Torque*

78027-IP30-1 2825 N-cm (250 in-lb) *Tightening torques are calculated with a friction coefficient of µ = 0.14 and develop 90% of ultimate yield strength. 8IP-30B

Refer to Speed and Feed charts for recommended adjustments to speeds and feeds and page A50: 34 for deep hole drilling guidelines in this section of the catalog. Visit www.alliedmachine.com/DeepHoleGuidelines for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our Application Engineering department : appeng@alliedmachine.com. WARNING

Mounting screws sold in multiples of 4. = Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

A50: 28