Drilling Product Catalog

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

Recommended Drilling Data | Imperial (in)

APX DRILL

Feed Rate (IPR)

3/8" IC

1/2" IC

9/16" IC

3/8" IC

1/2" IC

9/16" IC

38 - 44 Series 1.4961" - 1.8859"

44 - 51 Series 1.8860" - 2.2109"

51 - 63 Series 2.2110" - 2.7558"

70 Series 2.7559" - 2.9920"

76 - 83 Series 2.9921" - 3.5038"

89 - 95 Series 3.5039" - 4.0000"

0.007 - 0.012

0.009 - 0.012

0.009 - 0.012

0.006 - 0.010

0.007 - 0.011

0.007 - 0.012

0.007 - 0.012

0.009 - 0.012

0.009 - 0.012

0.006 - 0.010

0.007 - 0.011

0.007 - 0.012

0.007 - 0.012

0.009 - 0.012

0.009 - 0.012

0.006 - 0.010

0.007 - 0.011

0.007 - 0.012

0.005 - 0.009

0.007 - 0.010

0.007 - 0.011

0.005 - 0.009

0.006 - 0.010

0.006 - 0.010

0.005 - 0.007

0.005 - 0.008

0.006 - 0.009

0.005 - 0.007

0.005 - 0.008

0.006 - 0.008

0.007 - 0.009

0.008 - 0.010

0.009 - 0.011

0.005 - 0.009

0.006 - 0.010

0.007 - 0.010

0.005 - 0.007

0.007 - 0.009

0.008 - 0.010

0.005 - 0.007

0.006 - 0.009

0.007 - 0.010

0.007 - 0.009

0.008 - 0.010

0.009 - 0.011

0.005 - 0.007

0.007 - 0.009

0.007 - 0.010

0.006 - 0.008 0.005 - 0.007 0.006 - 0.010 0.010 - 0.014 0.008 - 0.012 0.005 - 0.008 0.007 - 0.009 0.003 - 0.006 0.004 - 0.007 0.006 - 0.008 0.005 - 0.007

0.007 - 0.009 0.007 - 0.009 0.008 - 0.012 0.012 - 0.016 0.010 - 0.014 0.007 - 0.010 0.008 - 0.010 0.006 - 0.008 0.006 - 0.009 0.007 - 0.009 0.006 - 0.008

0.008 - 0.010 0.007 - 0.009 0.010 - 0.012 0.012 - 0.016 0.010 - 0.014 0.009 - 0.011 0.009 - 0.012 0.008 - 0.010 0.007 - 0.009 0.008 - 0.010 0.006 - 0.008

0.004 - 0.008 0.004 - 0.007 0.008 - 0.010 0.006 - 0.009 0.006 - 0.009 0.006 - 0.009 0.006 - 0.008 0.006 - 0.008 0.004 - 0.006 0.004 - 0.006 0.004 - 0.006

0.006 - 0.010 0.006 - 0.009 0.009 - 0.011 0.008 - 0.011 0.008 - 0.011 0.007 - 0.010 0.007 - 0.009 0.006 - 0.008 0.005 - 0.007 0.005 - 0.007 0.005 - 0.007

0.006 - 0.010 0.007 - 0.010 0.010 - 0.012 0.008 - 0.012 0.008 - 0.012 0.008 - 0.012 0.008 - 0.012 0.006 - 0.008 0.005 - 0.007 0.005 - 0.007 0.005 - 0.007

A50

0.004 - 0.006

0.006 - 0.008

0.007 - 0.009

0.003 - 0.005

0.004 - 0.006

0.004 - 0.006

0.005 - 0.006

0.006 - 0.008

0.006 - 0.008

0.003 - 0.005

0.004 - 0.006

0.004 - 0.006

Tool failure can cause serious injury. To prevent: - Do not rotate tool more than 50 RPM unless it is engaged with the workpiece or fixture. WARNING

Refer to page A50: 34 for Deep Hole Drilling Guidelines in this section of the catalog. Visit www.alliedmachine.com/DeepHoleGuidelines for the most up-to-date information and procedures. Factory technical assistance is available for your specific applications through our Application Engineering department : appeng@alliedmachine.com.

www.alliedmachine.com | 1.330.343.4283

A50: 32