A25-TAP_US-EN

DRILLING | T-A Pro® High PenetraƟon Replaceable Insert Drilling System

T-A Pro Drilling System InformaƟon

A

Advanced Design CapabiliƟes The advanced T-A Pro insert combines a coaƟng and geometry specifically designed to achieve opƟmal results in ISO material drilling applicaƟons. With quick connecƟvity to exisƟng T-A drill insert holders, the T-A Pro insert can be interchanged with previous T-A inserts with ease, resulƟng in minimal setup Ɵmes so you can immediately increase your producƟvity.

T-A Pro Drill Inserts

DRILLING

T-A Pro inserts connect with:

B

T-A Pro holders

T-A holders

Carbide Geometries

BORING

High-Speed Steel Geometries

X - High-Speed Steel Materials • Improved chip geometry for excellent chip control in all materials. • Long tool life and high-process security for the most challenging applicaƟons. • Allied's mulƟlayer AM200® coaƟng combines excellent heat resistance and high lubricity for wide applicaƟon use.

P - Steels • Designed to provide increased penetraƟon rates and tool life in steel applicaƟons. • Superior geometry and edge provides excellent chip control. • Allied’s mulƟlayer AM300® coaƟng increases heat resistance and improves tool life. K - Cast Irons • Uniquely designed for cast/ducƟle iron applicaƟons. • Geometry developed for maximum tool life, reduced exit burr, and improved hole finish. • Allied’s mulƟlayer TiAlN coaƟng provides increased abrasion resistance and tool life. N - Nonferrous Materials • Designed for applicaƟons in aluminum, brass, and copper. • The geometry yields excellent chip control in these soŌer materials. • TiCN coaƟng gives the versaƟlity to run in a variety of materials while reducing buildup. M - Stainless Steel* • Designed for all stainless steels and heat-resistant superalloys. • Geometry opƟmized for improved chip formaƟon while minimizing exit burr. • Allied's new AM460 coaƟng provides industry leading tool life in stainless and HRSA materials.

P

X

C

REAMING

NEW point geometry

K

NEW flute design for increased chip evacuaƟon

D

BURNISHING

N

E

THREADING

M

*Available in Z -3 series only.

T-A Pro Drill Holders

Stub, 3xD, 5xD, 7xD, 10xD, 12xD, 15xD

X

SPECIALS

Proprietary coolant outlets improve coolant flow.

Provides increased insert life.

Available in Stub, 3xD, 5xD, 7xD, 10xD, 12xD, and 15xD.

Straight flutes.

www.alliedmachine.com | 1.330.343.4283

A25: 7