A91-SSD_EU-EN

DRILLING | Structural Steel SoluƟons | GEN3SYS® XT Pro and GEN3SYS® XT Replaceable Insert Drills

GEN3SYS® XT Pro Structural Steel Drilling System

A

STRUCTURAL STEEL ENHANCEMENTS GEN3SYS ® XT Pro ST

DRILLING

B

BORING

AM420

Improved Geometry Extends tool life and increases insert strength without increasing horsepower consumpƟon

New Point Design Increases stability without hindering penetraƟon

Redesigned Insert Provides consistent performance and adds durability

AM420 CoaƟng Increases heat threshold and extends tool life

C

REAMING

Get the Consistency You Need

Tough Drilling is Tough No More Structural steel applicaƟons can prove to be difficult to machine, so you need a drill that’s been put through the fire to ensure it can conquer those challenging applicaƟons. Rigorous tesƟng and countless hours of design and programming make the XT Pro structural steel insert the opƟmal drill for structural steel applicaƟons. • Diameter range: 12.00 mm - 35.00 mm (0.4724" - 1.3780"). • Holders available in 1.5xD, 3xD, 5xD, and 7xD lengths. • Flanged shank with flat. The challenge of drilling structural steel materials is about to get easier. Developed through a rigorous and thorough tesƟng process, the modified and improved XTST insert is a product of innovaƟon. Achieve the consistent performance you need while matching or even exceeding your current parameters.

D

BURNISHING

E

THREADING

X

SPECIALS

NOTICE: Structural steel GEN3SYS holders are specifically designed to be used only with GEN3SYS XT Pro and GEN3SYS XT structural steel geometry inserts. Using other GEN3SYS XT or XT Pro insert geometries in these holders could lead to chip packing and tool failure. Contact ApplicaƟon Engineering for quesƟons regarding proper use of tools. email: engineering.eu@alliedmachine.com

A91: 22

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com