A91-SSD_EU-EN

12

DRILLING | Structural Steel SoluƟons | GEN3SYS® XT Pro and GEN3SYS® XT Replaceable Insert Drills

GEN3SYS® XT Pro / GEN3SYS® XT Structural Steel Drilling System 12 Series | Diameter Range: 12.00 mm - 12.99 mm (0.4724" - 0.5117")

A

DRILLING

GEN3SYS® XT Pro

GEN3SYS® XT

Inserts

B

Insert

D 1 mm

D 1 inch 0.4724

FracƟonal Equivalent

GEN3SYS® XT Pro Part No.

GEN3SYS® XT Part No.

BORING

XTST12-12.00

7C212P-12ST

12.00

-

C

REAMING

Holders

Body

Shank

L 2

L 4

L 3

L 1

L 7

D 2 20 20 20 20

P 1

Length

Flat YES YES YES YES YES YES YES YES

Part No.

ST01120-20FM ST03120-20FM ST05120-20FM ST07120-20FM ST01120-075F ST03120-075F ST05120-075F ST07120-075F

1.5xD

19.5 39.0 65.0 90.9

47.1 66.6 92.6

49.3 68.8 94.8

97.1

50.0 50.0 50.0 50.0

1/8 BSPT 1/8 BSPT 1/8 BSPT 1/8 BSPT 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT

3xD 5xD 7xD

116.6 142.6 168.6 3.891 4.656 5.672 6.688

D

118.5

120.8

1.5xD

0.766 1.531 2.563 3.578

1.859 2.625 3.641 4.672

1.938 2.703 3.734 4.750

2.031 2.031 2.031 2.031

3/4 3/4 3/4 3/4

BURNISHING

3xD 5xD 7xD

E

ConnecƟon Accessories

THREADING

Admissible Tightening Torque* 84 N-cm (7.4 in-lbs)

Insert Screws

Nylon Locking Screws

Insert Driver

Replacement Tips

Preset Torque Hand Driver

7247-IP7-1

7247N-IP7-1

8IP-7

8IP-7TL

8IP-7B

*Tightening torques are calculated with a fricƟon coefficient of µ = 0.14 and develop 90% of ulƟmate yield strength.

X

A91: 66 - 67

A91: 24 - 25

Key on A91: 1

Inserts sold in mulƟples of 1. | Screws sold in mulƟples of 10. = Metric (mm) = Imperial (in)

SPECIALS

NOTICE: Structural steel GEN3SYS holders are specifically designed to be used only with GEN3SYS XT Pro and GEN3SYS XT structural steel geometry inserts. Using other GEN3SYS XT or XT Pro insert geometries in these holders could lead to chip packing and tool failure. Contact ApplicaƟon Engineering for quesƟons regarding proper use of tools. email: engineering.eu@alliedmachine.com

A91: 26

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com