A91-SSD_EU-EN

DRILLING | Structural Steel SoluƟons | 4TEX® Indexable Drill

4TEX® Drilling System

4TEX Drill Advantages Superior chip evacuation provided by the two twisted coolant holes Improved hole size from the increased holder rigidity Longer tool life provided by the four-sided insert design Optimal chip formation

A

DRILLING

B

with ISO-specific insert geometry/coaƟng combinaƟons Competitive cycle times due to single effecƟve cuƫng when using light duty machines

BORING

Double Coolant Hole

Center Insert Flute

Periphery Insert Flute

DESIGNED TO GIVE YOU IMPROVED HOLE SIZE AND STRAIGHTNESS

C

REAMING

• The two twisted coolant holes allow the core to remain intact, making the core thicker and stronger for improved hole straightness even in uneven surfaces. • The enlarged dual coolant outlets increase the coolant volume, which improves the chip evacuaƟon resulƟng in improved hole size. • The flute space of the internal cuƫng edge side (where chips get stuck most oŌen) is 1.6x larger than typical IC drills, helping to miƟgate catastrophic failures and improves hole sizes.

D

LONGER TOOL LIFE

AVAILABLE LENGTHS

BURNISHING

2xD

3xD

E

THREADING

4xD

The 4 Edge Advantage When the cuƫng edge on the periphery insert wears down, it can be rotated and moved to the center insert posiƟon.

X

SPECIALS

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

A91: 41