AMPC-C_US-EN

REAMING | ALVAN® Reaming Systems by S.C.A.M.I.

CoaƟngs, Cuƫng Materials, and Dimple Indicators

A

CoaƟng InformaƟon

DRILLING

B

Uncoated Ideal for nonferrous applicaƟons

TiCN (C) Provides improved surface finish

TiN (N) Ideal for general purpose applicaƟons

TiAlN (A) Provides higher heat resistance to improve tool life

BORING

C

Alcrona (K) Provides excellent wear resistance and can help increase cuƫng speeds

Hardcut (H) Ideal for cast iron and hardened steel applicaƟons

R CoaƟng (R) Improved tool life in cast iron materials

T CoaƟng (T) OpƟmized tool life in Ɵtanium and very hard materials

REAMING

Cuƫng Material InformaƟon

Material

Indicator

Details

D

A fine-grain carbide suitable for all convenƟonal reaming applicaƟons. Recommended where rigidity is not excellent and speeds must be reduced.

Carbide

K

BURNISHING

Cermet provides high wear resistance and is recommended for abrasive and increased speed applicaƟons. Not recommended for poor rigidity or interrupted cuts.

Cermet

S

Dimple Indicators

Replaceable Head Style

9000 Series

7000 and 5000 Series

Monobloc Style

Cuƫng Ring Style

E

Material

Chamfered Profile

Two Dimples

Two Dimples

Two Dimples

THREADING

Carbide

Sharp Edge Profile

Two Dimples with Line

Two Dimples with Line

Two Dimples with Line

X

Cermet

SPECIALS

NOTE: The dimple locaƟon also indicates which two cuƫng teeth are 180° opposed.

www.alliedmachine.com | 1.330.343.4283

C: 9