AMPC-C_EU-EN

REAMING | ALVAN® Reaming Systems by S.C.A.M.I.

Lead-in Angle Information

A

Straight Flute

Lead-in

Angles

Chip Evacuation

Description

DRILLING

Lead-in can be used to improve finish.

A

45°

8°

Can be used for stock removal at the bottom of the hole. Reduce the feed by 40% of the values on the recommended cutting data pages.

F

90°

Straight

Standard and suitable for most materials.

B

G

45°

BORING

May provide improved straightness. Reduce the feed by 40% of the values on the recommended cutting data pages.

L

75°

Ideal for through holes. It is possible to increase the feed up to 100% of the values on the recommended cutting data pages.

N T V K

20°

Suitable for titanium based alloys.

C

30°

REAMING

Suitable for most materials and increases tool life.

45°

Excellent at breaking small chips that are easy to evacuate in blind hole applications. Requires 50% increased feed rate, which will result in reduced tool life when compared to other leads.

80°

0.10x45°

D

Helical Flute (Right-Hand) - Blind Hole Applications Only

BURNISHING

Lead-in

Angles

Chip Evacuation

Description

Standard and suitable for most materials.

E

25°

May provide better penetration rates in steels over 200 BHN.

Helical

M

45°

E

Excellent at breaking small chips that are easy to evacuate in blind hole applications. Requires 50% increased feed rate, which will result in reduced tool life when compared to other leads.

K

80°

THREADING

0.10x45°

Helical Flute (Left-Hand) - Through Hole Applications Only

Lead-in

Angles

Chip Evacuation

Description

Standard and suitable for most materials.

E

X

NOTE: Through hole applications only.

25°

May provide better penetration rates in steels over 200 BHN.

SPECIALS

Helical

M

45°

NOTE: Through hole applications only.

C: 8

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com