AMPC-C_EU-EN

ALVAN® Reamers Contents

Reference Icons The following icons will appear throughout the catalogue to help you navigate between products.

Introduction Information

Case Study Example. . . . . . . . . . . . . . . . . . 2 Reconditioning Service. . . . . . . . . . . . . . . . . . 3

Setup / Assembly Information Detailed instructions and information regarding the corresponding part(s)

Reaming Overview and Selection . . . . . . . . . . . . . . . . 4 - 6 Reamer Recommendation Guide . . . . . . . . . . . . . . . . . 7 Lead-ins, Coatings, Materials, and Dimples . . . . . . . . . . . . . . . . 8 - 9

Recommended Cutting Data Speed and feed recommendations for optimum and safe reaming

Replaceable Head Reamers

Replaceable Reamer Heads Refers to the reamer head options that connect to the reamer mandrels

Product Overview . . . . . . . . . . . . . . . . . 10 Product Nomenclature . . . . . . . . . . . . . . . . . 11

Heads . . . . . . . . . . . . . . 12 - 13 Screws . . . . . . . . . . . . . . 14 - 15 Mandrels . . . . . . . . . . . . . . 16 - 18

Replaceable Reamer Screws Refers to the reamer head screw options that connect the head to the reamer mandrels Replaceable Reamer Mandrels Refers to the reamer mandrel options that connect with the head and screw

Monobloc Reamers Product Overview . . . . . . . . . . . . . . . . . 20 Product Nomenclature . . . . . . . . . . . . . . . . . 21 Monobloc Reamers . . . . . . . . . . . . . . 22 - 2 7

Cutting Rings Refers to the available cutting ring options

Cutting Ring Style Reamers

Product Overview . . . . . . . . . . . . . . . . . 28 Product Nomenclature . . . . . . . . . . . . . . . . . 29

Shanks Refers to the available radial adjusting shanks and adapters

Cutting Rings . . . . . . . . . . . . . . 30 - 31 Mandrels . . . . . . . . . . . . . . 32 - 51

Through Coolant Option Indicates that the product is through coolant

Shanks Radial Adjusting Shanks . . . . . . . . . . . . . . 52 - 5 7 Radial Adjusting Adapters . . . . . . . . . . . . . . 58 - 59

Recommended Cutting Data

Replaceable Head Style . . . . . . . . . . . . . . 60 - 61 Monobloc Style . . . . . . . . . . . . . . 62 - 63 Cutting Ring Style . . . . . . . . . . . . . . 64 - 65 Replaceable Head Style . . . . . . . . . . . . . . 66 - 6 7 Monobloc Style . . . . . . . . . . . . . . 68 - 69 Cutting Ring Style . . . . . . . . . . . . . . 70 - 71 Technical Information Setup: Replaceable Head Style . . . . . . . . . . . . . . . . . 72 Setup: Monobloc Style . . . . . . . . . . . . . . . . . 73 Setup: Cutting Ring Style . . . . . . . . . . . . . . . . . 74 Diameter Measurement . . . . . . . . . . . . . . . . . 75 TIR Measurement and Adjustment . . . . . . . . . . . . . . 76 - 7 7 Troubleshooting Guide . . . . . . . . . . . . . . . . . 78

Metric (mm)

Allied Machine & Engineering offers ALVAN® Reamers through an exclusive supply agreement with S.C.A.M.I.® s.n.c. S.C.A.M.I. is an Italian manufacturer that has been producing high-quality cutting tools for over 40 years. In addition to producing close tolerances and dimensional accuracy of machined holes, this high-performance reaming product provides a lower cost per hole through its high penetration rates. This makes the ALVAN Reamer product line an ideal choice for finishing holes in a production environment. It can also prove to be an alternative to finish boring by providing more consistent hole sizes and lower cycle times. For additional information about all Allied Machine products, visit www.alliedmachine.com. For technical assistance, contact

Imperial (inch)

our Application Engineering department. email: engineering.eu@alliedmachine.com

C: 1

Made with FlippingBook Ebook Creator