AMPC_EU-EN
DRILLING | AccuPort 432® Port Contour CuƩers
Coolant Recommendations | Metric (mm) Carbide
A
Tube No. 4 - 5
Tube No. 6 - 8
Tube No. 10
Tube No. 12 - 16
Tube No. 20 - 24
DRILLING
Pressure / Flow Rate
T-A Series Y - Z
T-A Series 0
T-A Series 1
T-A Series 2
T-A Series 3
ISO Material
Free-Machining Steel 1118, 1215, 12L14, etc.
BAR LPM BAR LPM BAR LPM BAR LPM BAR LPM BAR LPM BAR LPM BAR LPM BAR LPM BAR LPM BAR LPM
20
16
17
15
12
12.2 11.4
16.3 13.3
25.3 20.6
41.5 36.5
71.9
Low-Carbon Steel
62
1010, 1020, 1025, 1522, 1144, etc.
17 17
10
10 10
10
8 7
Medium-Carbon Steel
9
8
B
1030, 1040, 1050, 1527, 1140, 1151, etc.
11.1 10.4
12.3
19.3 12.6
30
55.8 33.6
Alloy Steel
9.1
18.8
P
4140, 5140, 8640, etc. High-Strength Alloy 4340, 4330V, 300M, etc.
16 15
9 5
8 5
7 3
5 3
BORING
10.4
9.1
13.6
19.7
36.5
Structural Steel
16
9
8
7
5
A36, A285, A516, etc.
10.8
12
17.5
27.8
47.1
Tool Steel
15
5
5
3
3
H-13, H-21, A-4, 0-2, S-3, etc.
10.4
9.1
13.6
19.7
36.5
High-Temp Alloy
17
11.4 13.5 16.5 16.3
12.4 21.9 17.9 26.3
11
9
S
Hastelloy B, Inconel 600, etc.
11.1
35.4
62
C
Stainless Steel 400 Series
22.7
17.2 44.2
13.1
M
416, 420, etc.
13
75
Nodular, Grey, Ductile Cast Iron
15.5 10.7 24.1 13.4
7.2
6.2
6.2
5.5
REAMING
K
10.8
15.4
26.5
48.7
Aluminium
22
21.7
19.6 47.2
13.8
N
18.8
29
77
D
BURNISHING
E
THREADING
X
SPECIALS
IMPORTANT: The coolant pressure and flow rate recommendaƟons above represent a good approximaƟon to obtain opƟmum tool life and chip evacuaƟon at Allied’s recommended speeds and feeds. If lower coolant capabiliƟes exist in a drilling applicaƟon, the AccuPort 432 Port Contour CuƩer will sƟll funcƟon at reduced penetraƟon rates. Contact our ApplicaƟon Engineering Department for a more specific recommendaƟon of coolant requirements and/or speeds and feeds. email: engineering.eu@alliedmachine.com
www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com
A92: 33
Made with FlippingBook - Online catalogs