AMPC_EU-EN

THREADING | Solid Carbide and Indexable Thread Mills

Indexable Insert Thread Mills Overview

A

Bolt-in Style

• Replaceable inserts allow for quick setups and tool changes to keep the producƟon process moving smoothly • Inserts are available with AM210® coaƟng, which increases tool life • Available with 1 flute only

DRILLING

• MulƟple thread form styles are available • Tapered thread forms: NPT, NPTF, BSPT • Straight thread forms: BSPP, UN, UNJ, ISO

B

Bolt-in Style Indexable Thread Mill Assembly

BORING

Step 1: Slide the thread mill insert into the insert holder slot.

Step 2: Hand Ɵghten insert screws to hold insert in place.

Step 3: Tighten each screw to 1.5 Nm (1.1 Ō-lbs).

Step 4: Tighten each screw to 3.5 Nm (2.6 Ō-lbs).

C

REAMING

Pin Style

• Replaceable inserts allow for quick setups and tool changes to keep the producƟon process moving smoothly • Inserts are available with AM210® coaƟng, which increases tool life • Holders available in 2 styles: Weldon Shank and Shell Mill • Weldon Shank holders available with 1, 2, 3, and 5 flutes • Shell Mill holders available with 6, 7, and 8 flutes • Thread forms available: NPT, NPTF, BSPT, BSPP, API-ROUND, ACME, UN, UNJ, ISO

D

BURNISHING

Pin Style Indexable Thread Mill Assembly

E

THREADING

Step 1: Slide the thread mill insert into the insert holder slot.

Step 2: Slide the pin into the pin holder slot to hold the insert in place.

Step 3: Hand Ɵghten insert screws to hold insert in place. If there are three insert screws, start Ɵghtening the middle screw, then the two outer screws. Repeat for each insert.

Step 4: Following the order from step three, Ɵghten each screw to 1.5 Nm (1.1 Ō-lbs).

Step 5: Following the order from step three, Ɵghten each screw to 3.5 Nm (2.6 Ō-lbs).

X

SPECIALS

E: 36

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com