AMPC_EU-EN

SPECIALS | Special Tooling SoluƟons

Engineered Specials Featured Design | Guided T-A®

A

Guided T-A Highlights • Two adjustable Torx® PLUS screw pins allow for diameter adjustment to reduce TIR (Total Indicator Runout).

DRILLING

• Provides improved tool life and hole finish. • Guided wear pads improve hole straightness.

• Through coolant design with mulƟple coolant outlets along the drill holder provides stability in deep hole drilling applicaƟons and also improves chip evacuaƟon.

B

Industry ApplicaƟon AutomoƟve

Industry ApplicaƟon Aerospace

BORING

Triple Coolant Outlets • AddiƟonal coolant outlets help keep the holder straight and precise. • Longer holders experience and maintain increased stability in deeper holes.

C

REAMING

D

BURNISHING

Locate the two adjustable Torx® PLUS screws (one on each side).

Loosen each screw.

Adjust insert posiƟon.

Tighten each screw.

Number of Holes Drilled: ONE CompeƟng Insert & Holder

Number of Holes Drilled: ONE Allied Machine Special Insert & Holder

The Proof is in the Numbers The following results came from a real-life applicaƟon that uƟlised the Guided T-A. The customer was experiencing a high scrap rate and needed to find a soluƟon to eliminate the problem.

80

160

240

80

160

240

E

THREADING

320

320

400

480

In this applicaƟon, Allied Machine: • Eliminated £212,000 in scrap per year. • OpƟmised the chip formaƟon. • Enhanced the chip evacuaƟon. • Provided excellent surface finish. INCREASED tool life by

560

640

720

800

880

960

280 %

Our Chips

Their Chips

X

1040

1120

1220

SPECIALS

X: 16

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com