A50-APX_US-EN

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

38

APX Drill Holders 38 Series | Diameter Range: 1.496" - 1.732" (38.00 mm - 43.99 mm)

A

L 1

DRILLING

L 3

L 7

D 2

D 5

P 1

L 2

Straight Shank

B

Body

Shank

D 5

L 2

L 3

L 1

L 7

D 2

P 1

Length

Part No.

W3803H-150F W3805H-150F W3808H-150F W3810H-150F W3803H-200F W3805H-200F W3808H-200F W3810H-200F W3803H-40FM W3805H-40FM W3808H-40FM W3810H-40FM W3803H-50FM W3805H-50FM W3808H-50FM W3810H-50FM

3xD 5xD 8xD 3xD 5xD 8xD 10xD 10xD 3xD 5xD 8xD 3xD 5xD 8xD 10xD 10xD

1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99

5-1/8 8-5/8

7-47/64 11-13/64 16-25/64 19-27/32 7-47/64 11-13/64 16-25/64 19-27/32

10-25/64 13-55/64 19-3/64 22-33/64 12-15/64 15-45/64 20-57/64 24-59/64

2-11/16 2-11/16 2-11/16 2-11/16

1-1/2 1-1/2 1-1/2 1-1/2

1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT

BORING

13-7/8 17-1/4

5-1/8 8-5/8

4-1/2 4-1/2 4-1/2 4-1/2 70.00 70.00 70.00 70.00 80.00 80.00 80.00 80.00

2 2 2 2

13-7/8 17-1/4 130.51 219.99 351.99 439.90 130.51 219.99 351.99 439.90

C

196.49 284.51 416.51 503.91 196.49 284.51 416.51 503.90

265.71 353.70 485.70 573.71 276.50 364.49 496.99 583.91

40.00 40.00 40.00 40.00 50.00 50.00 50.00 50.00

REAMING

L 1

L 3

D

BURNISHING

D 5

L 2

CAT Integral Shank

D 5

Body

L 2

L 3

L 1

Length

inch

mm

Shank CV40 CV40 CV40 CV40 CV50 CV50 CV50 CV50

Part No.

W3803H-CV40 W3805H-CV40 W3808H-CV40 W3810H-CV40 W3803H-CV50 W3805H-CV50 W3808H-CV50 W3810H-CV50

3xD 5xD 8xD 3xD 5xD 8xD 10xD 10xD

1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732

38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99

5-1/8 8-5/8

8-5/16

11

E

11-49/64 16-31/32 20-7/16 11-49/64 16-31/32 20-7/16 8-5/16

14-29/64 19-21/32 23-1/8 12-5/16 15-49/64 20-31/32 24-7/16

13-7/8 17-1/4

THREADING

5-1/8 8-5/8

13-7/8 17-1/4

ConnecƟon Accessories

X

MounƟng Screw

MounƟng Screw Driver

Admissible Tightening Torque*

75020-IP20-1

8IP-20

60 in-lb (678 N-cm)

*Tightening torques are calculated with a fricƟon coefficient of µ = 0.14 and develop 90% of ulƟmate yield strength

SPECIALS

Refer to Speed and Feed charts for recommended adjustments to speeds and feeds. Refer to page A50: 30 for deep hole drilling guidelines in this secƟon of the catalog. Visit www.alliedmachine.com/DeepHoleGuidelines for the most up-to-date informaƟon and procedures. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering Team. ext: 7611 | email: appeng@alliedmachine.com WARNING

MounƟng screws sold in mulƟples of 4 = Imperial (in) = Metric (mm)

www.alliedmachine.com | 1.330.343.4283

A50: 9