A50-APX_EU-EN

38

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

APX Drill Holders 38 Series | Diameter Range: 38.00 mm - 43.99 mm (1.496" - 1.732")

A

L 1

L 3

L 7

DRILLING

D 2

D 5

P 1

L 2

Straight Shank

Body

Shank

D 5

L 2

L 3

L 1

L 7

D 2

P 1

Length

Part No.

B

W3803H-40FM W3805H-40FM W3808H-40FM W3810H-40FM W3803H-50FM W3805H-50FM W3808H-50FM W3810H-50FM W3803H-150F W3805H-150F W3808H-150F W3810H-150F W3803H-200F W3805H-200F W3808H-200F W3810H-200F

3xD 5xD 8xD 3xD 5xD 8xD 10xD 10xD 3xD 5xD 8xD 3xD 5xD 8xD 10xD 10xD

38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732

130.51 219.99 351.99 439.90 130.51 219.99 351.99 439.90

196.49 284.51 416.51 503.91 196.49 284.51 416.51 503.90

265.71 353.70 485.70 573.71 276.50 364.49 496.99 583.91

70.00 70.00 70.00 70.00 80.00 80.00 80.00 80.00

40.00 40.00 40.00 40.00 50.00 50.00 50.00 50.00 1-1/2 1-1/2 1-1/2 1-1/2

1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 BSPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT 1/4 NPT

BORING

5-1/8 8-5/8

7-47/64 11-13/64 16-25/64 19-27/32 7-47/64 11-13/64 16-25/64 19-27/32

10-25/64 13-55/64 19-3/64 22-33/64 12-15/64 15-45/64 20-57/64 24-59/64

2-11/16 2-11/16 2-11/16 2-11/16

13-7/8 17-1/4

C

5-1/8 8-5/8

4-1/2 4-1/2 4-1/2 4-1/2

2 2 2 2

REAMING

13-7/8 17-1/4

L 1

L 3

D 5

D

L 2

BURNISHING

CAT Integral Shank

D 5

Body

L 2

L 3

L 1

Length

mm

inch

Shank CV40 CV40 CV40 CV40 CV50 CV50 CV50 CV50

Part No.

W3803H-CV40 W3805H-CV40 W3808H-CV40 W3810H-CV40 W3803H-CV50 W3805H-CV50 W3808H-CV50 W3810H-CV50

3xD 5xD 8xD 3xD 5xD 8xD 10xD 10xD

38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99 38.00 - 43.99

1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732 1.496 - 1.732

5-1/8 8-5/8

8-5/16

11

11-49/64 16-31/32 20-7/16 11-49/64 16-31/32 20-7/16 8-5/16

14-29/64 19-21/32 23-1/8 12-5/16 15-49/64 20-31/32 24-7/16

13-7/8 17-1/4

5-1/8 8-5/8

E

13-7/8 17-1/4

THREADING

ConnecƟon Accessories

MounƟng Screw

MounƟng Screw Driver

Admissible Tightening Torque*

75020-IP20-1

8IP-20

678 N-cm (60 in-lb)

*Tightening torques are calculated with a fricƟon coefficient of µ = 0.14 and develop 90% of ulƟmate yield strength

X

SPECIALS

Refer to Speed and Feed charts for recommended adjustments to speeds and feeds. Refer to page A50: 30 for deep hole drilling guidelines in this secƟon of the catalogue. Visit www.alliedmachine.com/DeepHoleGuidelines for the most up-to-date informaƟon and procedures. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering Team. email: engineering.eu@alliedmachine.com WARNING

MounƟng screws sold in mulƟples of 4 = Metric (mm) = Imperial (in)

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

A50: 9