Wohlhaupter Boring Product Catalog

BORING | Master Shanks with MVS Connection

HSK Master Shanks (DIN 69893) Balanced

A

*X 1 : with one-piece clamping nut

Metric (mm)

HSK-A

MVS Connection

Shank

D

D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 ER 40 50 - 28 50 - 28*

X 1

L 1

L 2

D 5 — — — — — — — — — — — — — — — — — —

Weight (kg)

Part No. 246016 246004 246015 245011 246012 246013 246014 245012 245013 246009 245014 246020 246021 245015 246019 246022 245016 246018 246023 246010 246017 252090** 252091**

56.00 70.00 56.00 65.00 46.00 56.00 56.00 65.00 80.00 80.00

— —

— — — — — — — — — — — — — — — — — — — — —

0.40 0.70 0.60 0.80 0.70 0.80 0.80 1.10 1.50 2.10 1.70 2.40 5.00 4.00 2.90 7.80 7.80 3.70

40

30.00

50

—

20.00 30.00 30.00 39.00

63

— —

120.00 65.00 180.00 180.00 80.00 205.00 205.00 80.00 255.00 255.00 100.00 300.00 120.00

94.00 36.00 151.00 151.00 51.00 176.00 176.00 51.00 226.00 226.00

95.00

63.00

60.00

63 - 36

78.00

100

80 - 36

90.00

12.60 10.40

— —

5.00

100 - 56

17.50

ER 40

91.00

88.00

63.00

3.50

NOTE: Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. * D 4 = 49.50 mm ** Balanced without clamping nut.

NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

B10: ix - x Key on B10-A: 2

= Metric (mm) = Imperial (in)

B10-A: 5

www.alliedmachine.com | 1.330.343.4283