Wohlhaupter Boring Product Catalog

BORING | Master Shanks with MVS Connection

BT Master Shanks (JIS B 6339) Balanced

A

*X 1 : with one-piece clamping nut

Imperial (in)

MVS Connection

Shank

D 10

D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 63 - 36 ER 40

X 1

L 1

L 2

D 5 — — — — —

Taper Size

Weight (lbs)

Part No. 327012 327013 327016 327019 327020 259081* 327021 327029** 327036** 327030** 327037** 327031** 327038** 327032** 259082* 327022 327023 327024

1.575 1.811 1.811 2.126 2.520 2.755 2.559 8.071 8.071 2.953 8.858 8.858 2.953

0.710

— — — — — — — — — — — — — — — —

1.102 1.323 2.425 2.646 3.307 2.645 8.599

30

M12 x 1.75

—

0.750 1.060 1.692 1.060 6.567 6.567 1.449 7.354 7.354 1.449 9.323 9.323 9.913 1.645 — —

40

M16 x 2

4.094

2.480

—

2.362 1.949

15.435 13.010 9.261 21.830 17.199 10.363 32.634 32.634 12.127 38.147 8.377

50 - 28

—

63 - 36

3.071

— — — — —

50

M24 x 3

80 - 36

10.827 10.827 3.543 11.417 3.149

3.543

100 - 56

ER 40

5.314

2.480

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. *Balanced without clamping nut. **Available upon request.

B10: ix - x Key on B10-A: 2 NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING Assembly of modular components may cause machine damage and/or serious injury. To prevent:

= Metric (mm) = Imperial (in)

B10-A: 11

www.alliedmachine.com | 1.330.343.4283