Wohlhaupter Boring Product Catalog

BORING | Intermediate Modules

Reducers Balanced

B

Balancing Screw

Imperial (in)

MVS Connection

Reducer

D 2 | D 1

D 4 | D 3

X 1

L 1

D 5 — — — — —

Weight (lbs) Balancing Screw Part No.

219053 219042 219054 119095 119060 119061 119019 219031* 219089 219090 119021 219033* 219091 219092 119067 119064 119096**

19.5 - 11

2.126 0.551 2.126 0.551 2.323 2.323 4.685 4.685 1.929 4.291 4.291 4.291 1.575 3.937 5.906 1.575 1.575 3.937 3.937 1.969 2.756

1.614 0.020 1.614 0.020 1.811 1.811 4.173 4.173 1.417 3.780 3.780 3.780 1.063 3.425 5.394

1.322 1.322 1.543 1.322 1.543 1.763 2.425 2.866 1.543 2.645 3.086 3.527 1.763 3.527 5.291 2.204 1.763 5.291 3.747 3.527 7.936

M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 15 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 15 M6 x 1 x 15 M6 x 1 x 10 M6 x 1 x 10 M6 x 1 x 15 M6 x 1 x 10 M6 x 1 x 15

22 - 11

1.260 1.260 1.417 1.378 1.378 1.575 1.811 1.850 1.969 2.480 —

25 - 14

63 - 36

32 - 18

40 - 22

—

1.063

—

50 - 28

119025

—

2.480

119097**

3.425

—

119098 219066

80 - 36 100 - 56

63 - 36 80 - 36

—

3.150

2.047

—

M8 x 1.25 x 20

* Reinforced reducer. **For milling applications. NOTE: Balance refers to a specific residual imbalance of ≤ 10 g mm/kg.

Assembly of modular components may cause machine damage and/or serious injury. To prevent: -Do not exceed the allowable weight for your machine tool. -Do not exceed the recommended length-to-diameter ratio, which can impact tool stability and performance. For detailed guidelines on safe configurations, please refer to pages B10-M: 9 - 12 or visit www.alliedmachine.com/WohlhaupterBoringGuidelines. WARNING NOTE: Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com . IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com .

B10: ix - x

B10-A

Key on B10-B: 2

= Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

B10-B: 14