Wohlhaupter Boring Product Catalog

BORING | Rough Machining

VolCut Insert Holders Diameter Range: 65.00 mm - 3255.00 mm (2.559" - 128.150")

Metric (mm)

Connection

Boring Range

Serrated Body

Insert Holder

Weight (kg)

Number of Inserts

Serrated Body 148005 148006 148007 148007 148009 Serrated Body 148005 148006 148007 148007 148009 *

C

D 2 | D 1 50 - 28 63 - 36

A

A min **

X 1

X 2

D 5 — — — —

Form Part No.

151019 151039 151059 151069 151069 149030

65.00 - 83.00 65.00 - 70.00 74.00 55.00 82.00 - 103.00 82.00 - 87.00 89.00 60.00 100.00 - 130.00 100.00 - 105.00 89.00 60.00 125.00 - 155.00 125.00 - 130.00 89.00 60.00

1.10 2.20 3.00 3.20

2 3 3 3 3

464 464 464 464 464 464

80 - 36

150.00 - 205.00 150.00 - 155.00 89.00 60.00 125.00 5.10

200.00 - 3255.00

—

— — — — 3

D60

Imperial (in)

Connection

Boring Range

Serrated Body

Insert Holder

Weight (lbs)

Number of Inserts

D 2 | D 1 50 - 28 63 - 36

A

A min **

X 1

X 2

D 5 — — — —

Form Part No.

151019 151039 151059 151069 151069 149030

2.559 - 3.268 2.559 - 2.756 2.913 2.165 3.228 - 4.055 3.228 - 3.425 3.504 2.362 3.937 - 5.118 3.937 - 4.134 3.504 2.362 4.921 - 6.102 4.921 - 5.118 3.504 2.362

2.425 4.850 6.613 7.054

2 3 3 3 3

464 464 464 464 464 464

80 - 36

5.906 - 8.071 5.906 - 6.102 3.504 2.362 4.921 11.243

*

7.874 - 128.150

—

— — — — 3

D60

NOTE : Inserts, insert holders, and serrated body are sold separately. *For large diameter serrated slides, please contact Application Engineering (330.343.4283) and see section B10-H. **For smaller diameters, both cartridges must be set to the same diameter. Only the outside insert on each cartridge can be engaged in the material. IC Inserts

Part No.

Carbide Grade P35 (C5) K35 (C1) K25 (C2) P35 (C5)

Insert Screws*

AM300®

Geometry

Driver

OP-05T308-P OP-05T308-1P OP-05T308-2P OP-05T308-PHR

IS-10-1

8T-9

Standard

High Rake 8T-9 NOTE: See section A70 in the Allied Drilling Catalog for recommended cutting data, cutting materials, and geometries. IS-10-1

For large diameter boring with VolCut insert holders, please: - Contact our Application Engineering department before purchasing: appeng@alliedmachine.com. - Refer to section B10-H . WARNING

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com .

B10: ix - x Key on B10-C: 2

= Metric (mm) = Imperial (in)

Inserts sold separately.

B10-C: 15

www.alliedmachine.com | 1.330.343.4283