Wohlhaupter Boring Product Catalog

BORING | Rough Machining

Chamfering Tools Insert Holders | Diameter Range: 19.00 mm - 216.00 mm (0.748" - 8.504")

Metric (mm)

Connection Approach Angle ( K ) D 2 | D 1

Chamfering Tool

Insert Holder

Boring Range (A)

Chamfering Range ( A 1 )

Weight (kg)

Serrated Body 148005 148005 148005 148005 148006 148006 148006 148006 148007 148007 148009 148007 148007 148009 148007 148007 148009 148007 148007 148009

C

X 1

X 2

D 5

W

Form Part No.

201061 201021 201071 201010 201062 201022 201072 201011 201063 201064 201064 201023 201024 201024 201073 201074 201074 201012 201013 201013

15° 20° 30° 45° 15° 20° 30° 45°

50.00 - 68.00 58.00 - 76.00 80.00 55.00 50.00 - 68.00 60.00 - 78.00 80.00 55.00 50.00 - 68.00 65.00 - 83.00 80.00 55.00 55.00 - 73.00 70.00 - 88.00 80.00 55.00 68.00 - 89.00 76.00 - 97.00 90.00 60.00 68.00 - 89.00 78.00 - 99.00 90.00 60.00 68.00 - 89.00 83.00 - 104.00 90.00 60.00 72.00 - 93.00 87.00 - 108.00 90.00 60.00 89.00 - 119.00 97.00 - 127.00 90.00 60.00 119.00 - 149.00 127.00 - 159.00 90.00 60.00 89.00 - 119.00 99.00 - 129.00 90.00 60.00 119.00 - 149.00 129.00 - 159.00 90.00 60.00 89.00 - 119.00 104.00 - 134.00 90.00 60.00 119.00 - 149.00 134.00 - 164.00 90.00 60.00 92.00 - 122.00 107.00 - 137.00 90.00 60.00 121.00 - 151.00 136.00 - 166.00 90.00 60.00

- - - - - - - - - - - - - - - -

4.00 1.00 5.00 1.00 7.50 1.00 7.50 1.00 4.00 1.90 5.00 1.90 7.50 1.90 7.50 1.90 4.00 2.60 4.00 2.70 5.00 2.60 5.00 2.70 7.50 2.60 7.50 2.70 7.50 2.60 7.50 2.70

163 163 163 113 163 163 163 113 163 163 163 163 163 163 163 163 163 113 113 113

50 - 28

63 - 36

15°

144.00 - 199.00 152.00 - 207.00 90.00 60.00 125.00 4.00 3.60

20°

144.00 - 199.00 154.00 - 209.00 90.00 60.00 125.00 5.00 3.60

80 - 36

30°

144.00 - 199.00 159.00 - 214.00 90.00 60.00 125.00 7.50 3.60

45°

146.00 - 201.00 161.00 - 216.00 90.00 60.00 125.00 7.50 3.60

NOTE: K 45° for front and reverse chamfering above Ø 31.00 mm. NOTE : Insert holders and inserts sold separately.

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Factory technical assistance is available through our Application Engineering department: appeng@alliedmachine.com .

B10: ix - x

B10-A

B10-C: 24

B10-I

Key on B10-C: 2

= Metric (mm) = Imperial (in)

Inserts sold separately.

www.alliedmachine.com | 1.330.343.4283

B10-C: 20