AMPC_US-EN

DRILLING | T-A® Replaceable Insert Drilling System

A

Cam Point (-CP) • Helical cam ground point. • Improves drill stability and centering characterisƟcs.

Notch Point® (-NP) • Reduces bellmouth and lead-off. • Increases stability in deep hole applicaƟons. • Reduces thrust. • Can be used in addiƟon to other geometries like cast iron, high rake, and high impact. High Impact Notch Point® (-IN) • CombinaƟon of high impact and Notch Point geometries. • Increases stability in deep hole applicaƟons. • Enhances chip formaƟon in materials with high elasƟcity/ducƟlity and poor chip forming characterisƟcs. High Rake Notch Point® (-RN) • CombinaƟon of high rake and Notch Point geometries. • Reduces bellmouth and lead-off. • Improves chip formaƟon in materials with very high elasƟcity/ducƟlity, extremely poor chip forming characterisƟcs, and low material hardness. Cast Iron Notch Point® (-CN) • CombinaƟon of cast iron and Notch Point geometries. • Increases stability in deep hole applicaƟons. • Specifically designed for use in grey and white cast irons.

DRILLING

• Reduces bellmouthing when using longer holders. • Target materials: steels, cast/forged steels, cast iron. High Impact (-HI) • Designed for materials with hardness > 200 BHN (700 N/mm 2 ). • Enhances chip formaƟon in materials with high elasƟcity/ducƟlity and poor chip forming characterisƟcs. • SK corner clip improves tool life. • Target materials: structural/cast and forged steels (not suitable for stainless steel). High Rake (-HR) • Designed for materials with hardness < 200 BHN (700 N/mm 2 ). • Improves chip formaƟon in materials with very high elasƟcity/ducƟlity, extremely poor chip forming characterisƟcs, and low material hardness. • SK corner clip improves tool life. • Target materials: soŌ steels, steel casƟngs and forgings (not suitable for stainless steel). Cast Iron (-CI) • Specifically designed for use in grey and white cast irons. • ExcepƟonal edge strength. • SK2 corner preparaƟon for improved tool life. • Standard geometry on C3 (K10) carbide inserts. Aluminum (-AN) • First choice for machining aluminum. • Enhanced geometry improves chip formaƟon and hole quality. • TiN coaƟng improves heat resistance and extends tool life. 90° Spot and Chamfer (-SP) • Center cuƫng web design improves stability and strength. • Eliminates the need for a secondary chamfering operaƟon. • Available with chipbreakers (see -SW below).

B

BORING

C

REAMING

D

BURNISHING

Brass (-BR) • Improves tool life due to the specialized geometry and edge preparaƟon. • Reduces self-feed tendency.

E

Flat BoƩom (-FB) • Ideal for flaƩening or squaring the boƩom of preexisƟng holes with high rigidity. • Includes small 10° point on the nose of the insert. • Available without chipbreakers (see -FN below).

THREADING

90° Spot and Chamfer (-SW) • Center cuƫng web design improves stability and strength. • Eliminates the need for a secondary chamfering operaƟon. • With added chipbreakers.

Flat BoƩom (-FN) • Ideal for flaƩening or squaring the boƩom of preexisƟng holes with high rigidity. • Includes small 10° point on the nose of the insert. • Available with chipbreakers (see -FB above).

X

SPECIALS

www.alliedmachine.com | 1.330.343.4283

A30: 5