B10-F_US-EN

BORING | Master Shanks with MVS Connection

Polygon Shaft Master Shanks (PSC) (ISO 26623-1) Balanced

A

X 1

L 1

B

D 3 D 4

D

C

D

PSC

Connection

Shank

D 4 | D 3 40 - 22 50 - 28 63 - 36 80 - 36 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 63 - 36 80 - 36 40 - 22 50 - 28 63 - 36 80 - 36 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 63 - 36 80 - 36

Weight

Part No. 227014 227001 227002 227012 227010 227009 227008 227003 227004 227005 227011 227006 227007 227014 227001 227002 227012 227010 227009 227008 227003 227004 227005 227011 227006 227007

D

X 1

L 1

50 50 50 50 63 63 63 63 63 63 80 80 80 50 50 50 50 63 63 63 63 63 63 80 80 80

2.126 2.559 3.150 3.150 2.126 2.126 2.559 2.559 3.150 3.150 2.559 3.150 3.150 54.00 65.00 80.00 80.00 54.00 54.00 65.00 65.00 80.00 80.00 65.00 80.00 80.00

1.224

1.543 (lbs) 2.205 (lbs) 3.307 (lbs) 5.512 (lbs) 1.984 (lbs) 2.205 (lbs) 2.425 (lbs) 2.866 (lbs) 3.968 (lbs) 5.732 (lbs) 4.850 (lbs) 5.732 (lbs) 7.275 (lbs)

- - -

E

0.838 0.917 1.433 1.555

F

- -

1.047 1.783

G

-

31.10

0.70 (kg) 1.00 (kg) 1.50 (kg) 2.50 (kg) 0.90 (kg) 1.00 (kg) 1.10 (kg) 1.30 (kg) 1.80 (kg) 2.60 (kg) 2.20 (kg) 2.60 (kg) 3.30 (kg)

- - -

H

21.10 23.00 36.40 39.00

I

- -

25.00 45.10

-

J

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg

K

B10-M: 12-15

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm )

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-F: 6

www.alliedmachine.com | 1.330.343.4283

Made with FlippingBook flipbook maker