B10-F_US-EN

Wohlhaupter® Master shanks with MVS connection

Drilling

Reaming

Burnishing

Threading

Wohlhaupter ® BORING Master Shanks with MVS Connection

Specials

S E C T I O N B10-F Master Shanks with MVS Connection

Wohlhaupter ® Master Shanks with MVS Connection

The MVS Connection Wohlhaupter MVS connection shanks provide a high level of accuracy when building or replacing components. Our master shanks adapt to any machine tool spindle, making it easy to find the shank you need.

Your safety and the safety of others is very important. This catalog contains important safety messages. Always read and follow all safety precautions. This triangle is a safety hazard symbol. It alerts you to potential safety hazards that can cause tool failure and serious injury. When you see this symbol in the catalog, look for a related safety message that may be near this triangle or referred to in the nearby text. There are safety signal words also used in the catalog. Safety messages follow these words. WARNING (shown above) means that failure to follow the precautions in this message could result in tool failure and serious injury. NOTICE means that failure to follow the precautions in this message could result in damage to the tool or machine but not result in personal injury. NOTE and IMPORTANT are also used. These are important that you read and follow but are not safety-related. Visit www.alliedmachine.com for the most up-to-date information and procedures. WARNING

Applicable Industries

Aerospace Agriculture

Automotive

Firearms

General Machining

Oil & Gas

Renewable Energy

Reference Icons The following icons will appear throughout the catalog to help you navigate between products.

Master Shanks with MVS Connection Table of Contents

249 (248) Shanks . . . . . . . . . . . . . . . . . 2

MVS Connection Color Guide Detailed instructions and information regarding the MVS connection(s) Recommended Cutting Data Speed and feed recommendations for optimum and safe boring

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

Carbide Shanks . . . . . . . . . . . . . . . . . 3

HSK Shanks (DIN 69893) . . . . . . . . . . . . . . . . 4 - 5

Polygon Shaft Shanks (PSC) (ISO26623-1) . . . . . . . . . . . . . . . . . 6

Clamping Elements Collet chucks for carbide shanks

Dual Contact CAT Shanks with Imperial Threads . . . . . . . . . . . . . . . . . 7

CAT Shanks with Imperial Threads . . . . . . . . . . . . . . . . . 8

Coolant-Through Option Indicates that the product is coolant through

CAT Shanks with Metric Threads . . . . . . . . . . . . . . . . . 9

Dual Contact SK Shanks (DIN 69871-AD / B-D) . . . . . . . . . . . . . . . . . 10

SK Shanks (DIN 69871-AD / B-D) . . . . . . . . . . . . . . . . 11

Dual Contact BT Shanks (JIS B 6339) . . . . . . . . . . . . . . . . 12

BT Shanks (JIS B 6339) . . . . . . . . . . . . . . . . 13

NMTB Shanks . . . . . . . . . . . . . . . . 14

Imperial Straight Shanks . . . . . . . . . . . . . . . . 15

DIN 2080 Shanks . . . . . . . . . . . . . . . . 16

Morse Taper Shanks (DIN 1806) | R8 Shanks . . . . . . . . . . . . . . . . 17

Accessories . . . . . . . . . . . . . . 18 - 19

Mounting Fixtures . . . . . . . . . . . . . . . . 20

B10-F: 1

BORING | Master Shanks with MVS Connection

249 (248) Shanks Steel | Carbide

A

L 1

L 3

B

D 1

M8 x 1

C

Steel Shanks

Shank

L 3 min *

D

Connection

SK 40+50

HSK-A 63

HSK-A 100

Weight

Part No. 248136 248137 248138 248136 248137 248138

D 1

L 1

L 3 max* 1.456 2.047 2.716 37.00 52.00 69.00

M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1

0.591 0.709 0.906 15.00 18.00 23.00

3.346 3.937 4.606

- - - - - -

-

-

0.220 (lbs) 0.440 (lbs) 0.881 (lbs)

0.196 0.866

0.472 1.141

E

85.00

-

-

0.10 (kg) 0.20 (kg) 0.40 (kg)

100.00 117.00

5.00

12.00 29.00

22.00

* L 3 dimensions apply to collet chucks

L 1

F

L 3

G

D 1

M8 x 1

H

Carbide Shanks

Shank

L 3 min*

I

Connection

SK 40 0.787 1.535 2.519 4.960 20.00 39.00 64.00

SK 50 0.787 0.826 1.811 4.251 20.00 21.00 46.00

HSK-A 63

HSK-A 100

Weight

Part No. 248142 248143 248144 248145 248142 248143 248144 248145

D 1

L 1

L 3 max* 3.228 4.212 5.196 7.637

M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1 M8 x 1

0.591 0.709 0.906 0.906 15.00 18.00 23.00 23.00

5.118 6.102 7.086 9.527

1.377 2.362 3.346 5.787 35.00 60.00 85.00

1.653 2.637 3.622 6.062 42.00 67.00 92.00

0.661 (lbs) 1.322 (lbs) 2.425 (lbs) 3.086 (lbs)

J

130.00 155.00 180.00 242.00

82.00

0.30 (kg) 0.60 (kg) 1.10 (kg) 1.40 (kg)

107.00 132.00 194.00

126.00

108.00

147.00

154.00

K

* L 3 dimensions apply to collet chucks

B10-M: 12-15

B10-A: 30

B10: vi-vii

Key on B10-A: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Imperial (in) = Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-F: 2

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

Carbide Master Shanks

A

L 1

B

L 3

D 3

D 4

D 1

C

D

Connection

Shank

L 3 min

D 4 | D 3 18 - 11 22 - 11 22 - 11 22 - 11 25 - 14 25 - 14 32 - 18 32 - 18 40 - 22 18 - 11 22 - 11 22 - 11 22 - 11 25 - 14 25 - 14 32 - 18 32 - 18 40 - 22

SK 40 1.535 1.102 2.913 4.528 1.929 3.898 5.354 7.323

SK 50 1.024 1.102 2.205 3.819 1.417 3.189 5.354 7.323 26.00 28.00 56.00 97.00 36.00 81.00 13.110 136.00 186.00 333.00

HSK-A 63

HSK-A 100

Weight

Part No. 299009* 299001* 299002* 299003* 299004* 299005* 299006** 299007** 299008** 299009* 299001* 299002* 299003* 299004* 299005* 299006** 299007** 299008**

L 1

D 1

L 3 max 4.213 3.622 5.591 7.205 4.606 6.575

6.102 5.512 7.480 9.049 6.496 8.465 8.268

0.709 0.866 0.866 0.866 0.984 0.984 1.260 1.260 1.575 18.00 22.00 22.00 22.00 25.00 25.00 32.00 32.00 40.00

2.362 1.772 3.740 5.354 2.756 4.724 5.572 7.441

2.638 2.047 4.016 5.630 3.031 5.000 5.394 7.362

1.102 (lbs) 1.543 (lbs) 1.984 (lbs) 2.425 (lbs) 2.205 (lbs) 2.866 (lbs) 4.630 (lbs) 5.732 (lbs) 11.460 (lbs)

E

- - -

F

10.236 16.399 155.00 140.00 190.00 231.00 165.00 215.00 210.00 260.00 415.00

-

-

13.110

107.00

39.00 28.00 74.00

60.00 45.00 95.00

67.00 52.00

0.50 (kg) 0.70 (kg) 0.90 (kg) 1.10 (kg) 1.00 (kg) 1.30 (kg) 2.10 (kg) 2.60 (kg) 5.20 (kg)

92.00

142.00 183.00 117.00 167.00

102.00 143.00

G

115.00

136.00

49.00 99.00

70.00

77.00

120.00 139.00 189.00

127.00 137.00 187.00 333.00

- - -

136.00 186.00

H

-

-

NOTE : Adapter shanks are used for extensions up to 10xD * Recommended clamping element: collet chuck ISO 15488 (DIN 6499-B) (pg. B10-I: 5) **Recommended clamping element: collet chuck ISO 10897 (DIN 6388) (pg. B10-I: 5)

I

J

K

B10-M: 12-15

B10: vi-vii

B10-I: 5

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Imperial (in) = Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-F: 3

BORING | Master Shanks with MVS Connection

HSK Master Shanks (DIN 69893) Imperial | Balanced

A

X 1

L 1

B

D 3 D 4 D 5

D 3 D 4

D

C

X 1*

L 1

D

D 5

D

L 2

E

Taper Size

Connection

Shank

D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 50 - 28 50 - 28* 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36 ER 40

Weight

Part No. 246016 246004 246015 245011 246012 246013 246014 245012 245013 246009 245014 246020 246021 245015 246019 246022 245016 246018 246023 246010 246017 252090** 252091**

D

X 1

L 1

L 2

D 5

40 40 50 50 63 63 63 63 63 63 63

2.205 2.756 2.205 2.559 1.811 2.205 2.205 2.559 3.150 3.150 4.724 2.559 7.087 7.087 3.150 8.071 8.071 3.150 10.03 10.03 3.937

- -

- - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - -

0.881 (lbs) 1.543 (lbs) 1.322 (lbs) 1.763 (lbs) 1.543 (lbs) 1.763 (lbs) 1.764 (lbs) 2.425 (lbs) 3.306 (lbs) 4.629 (lbs) 3.747 (lbs) 5.291 (lbs) 11.020 (lbs) 6.393 (lbs) 6.393 (lbs) 17.190 (lbs) 17.190 (lbs) 8.157 (lbs) 27.770 (lbs) 22.920 (lbs) 11.020 (lbs) 38.580 (lbs) 7.716 (lbs)

F

1.181

-

0.787 1.181 1.181 1.535

G

- -

3.700 1.417 5.944 5.944 2.007 6.929 6.929 2.007 8.897 8.897

3.740

2.480

H

100 100 100 100 100 100 100 100 100 100 100 100

-

2.362

- -

I

3.070

- -

3.543

- - -

J

100 - 56 100 - 56

-

11.810

8.700 3.582

ER 40

4.724

3.464

2.480

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg * D 4 = 49.50 **Balanced without clamping nut

K

B10-M: 12-15

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm )

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-F: 4

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

HSK Master Shanks (DIN 69893) Metric | Balanced

A

X 1

L 1

B

D 3 D 4 D 5

D 3 D 4

D

C

X 1*

L 1

D

D 5

D

*X 1 : with one piece clamping nut

L 2

E

Taper Size

Connection

Shank

D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 50 - 28 50 - 28* 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36 ER 40

Weight 0.40 (kg) 0.70 (kg) 0.60 (kg) 0.80 (kg) 0.70 (kg) 0.80 (kg) 0.80 (kg) 1.10 (kg) 1.50 (kg) 2.10 (kg) 1.70 (kg) 2.40 (kg) 5.00 (kg) 4.00 (kg) 2.90 (kg) 7.80 (kg) 7.80 (kg) 3.70 (kg) 12.60 (kg) 10.40 (kg) 5.00 (kg) 17.50 (kg) 3.50 (kg)

Part No. 246016 246004 246015 245011 246012 246013 246014 245012 245013 246009 245014 246020 246021 245015 246019 246022 245016 246018 246023 246010 246017 252090** 252091**

D

X 1

L 1

L 2

D 5

40 40 50 50 63 63 63 63 63 63 63

56.00 70.00 56.00 65.00 46.00 56.00 56.00 65.00 80.00 80.00

- -

- - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - -

F

30.00

-

20.00 30.00 30.00 39.00

G

- -

120.00

94.00 36.00

95.00

63.00

H

100 100 100 100 100 100 100 100 100 100 100 100

65.00

-

180.00 180.00

151.00 151.00

60.00

- -

80.00

51.00

I

205.00 205.00

176.00 176.00

78.00

- -

80.00

51.00

255.00 255.00 100.00 300.00 120.00

226.00 226.00

90.00

- - -

J

100 - 56 100 - 56

-

221.00

ER 40

91.00

88.00

63.00

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg * D 4 = 49.50mm **Balanced without clamping nut

K

B10-M: 12-15

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm )

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-F: 5

BORING | Master Shanks with MVS Connection

Polygon Shaft Master Shanks (PSC) (ISO 26623-1) Balanced

A

X 1

L 1

B

D 3 D 4

D

C

D

PSC

Connection

Shank

D 4 | D 3 40 - 22 50 - 28 63 - 36 80 - 36 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 63 - 36 80 - 36 100 - 56 40 - 22 50 - 28 63 - 36 80 - 36 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 63 - 36 80 - 36 100 - 56

Weight

Part No. 227014 227001 227002 227012 227010 227009 227008 227003 227004 227005 227011 227006 227007 227013 227014 227001 227002 227012 227010 227009 227008 227003 227004 227005 227011 227006 227007 227013

D

X 1

L 1

50 50 50 50 63 63 63 63 63 63 80 80 80 80 50 50 50 50 63 63 63 63 63 63 80 80 80 80

2.126 2.559 3.150 3.150 2.126 2.126 2.559 2.559 3.150 3.150 2.559 3.150 3.150 3.937 54.00 65.00 80.00 80.00 54.00 54.00 65.00 65.00 80.00 80.00 65.00 80.00 80.00

1.224

1.543 (lbs) 2.205 (lbs) 3.307 (lbs) 5.512 (lbs) 1.984 (lbs) 2.205 (lbs) 2.425 (lbs) 2.866 (lbs) 3.968 (lbs) 5.732 (lbs) 4.850 (lbs) 5.732 (lbs) 7.275 (lbs) 10.759 (lbs)

- - -

E

0.838 0.917 1.433 1.555

F

- -

1.047 1.783

G

- -

31.10

0.70 (kg) 1.00 (kg) 1.50 (kg) 2.50 (kg) 0.90 (kg) 1.00 (kg) 1.10 (kg) 1.30 (kg) 1.80 (kg) 2.60 (kg) 2.20 (kg) 2.60 (kg) 3.30 (kg) 4.88 (kg)

- - -

H

21.10 23.00 36.40 39.00

I

- -

25.00 45.10

J

- -

100.00

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg

K

B10-M: 12-15

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm )

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-F: 6

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

Dual Contact CAT Master Shanks with Imperial Threads

A

X 1

L 1

B

L 2

D 3 D 4 D 9

D 10

C

D

Connection

Shank

Taper Size

D 4 | D 3 50 - 28 50 - 28 63 - 36 50 - 28 50 - 28* 63 - 36 63 - 36 80 - 36 80 - 36 50 - 28 50 - 28 63 - 36 50 - 28 50 - 28* 63 - 36 63 - 36 80 - 36 80 - 36 100 - 56 100 - 56 100 - 56 100 - 56

Weight

Part No. 353062 353076 353063 353061 353077 353078 353079 353060 353080 353081 353082 353062 353076 353063 353061 353077 353078 353079 353060 353080 353081 353082

X 1

L 1

L 2

D 9

D 10

5/8 - 11 5/8 - 11 5/8 - 11

40 40 40 50 50 50 50 50 50 50 50 40 40 40 50 50 50 50 50 50 50 50

2.440 5.394 3.228 2.440 7.953 2.835 8.740 2.834

1.688 4.642 2.440 1.689 7.201 2.083 7.988 2.082 9.957 3.382

1.062 4.016 1.850 1.062 6.575 1.457 7.362 1.456 9.331 2.756

1.752 1.752 1.752 2.752 2.752 2.752 2.752 2.752 2.752 2.752 2.752 44.50 44.50 44.50 69.90 69.90 69.90 69.90 69.90 69.90 69.90 69.90

2.866 (lbs) 5.292 (lbs) 3.968 (lbs) 7.275 (lbs) 11.687 (lbs) 7.938 (lbs) 15.656 (lbs) 9.039 (lbs) 26.240 (lbs) 13.230 (lbs) 39.470 (lbs) 1.30 (kg) 2.40 (kg) 1.80 (kg) 3.30 (kg) 5.30 (kg) 3.60 (kg) 7.10 (kg) 4.10 (kg) 11.90 (kg) 6.00 (kg) 17.90 (kg)

E

1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8

F

10.709

4.134

12.008

11.256

10.630

5/8 - 11 5/8 - 11 5/8 - 11

62.00

42.90

27.00

G

137.00

117.90

102.00

82.00 62.00

62.90 42.90

47.00 27.00

202.00

182.90

167.00

H

72.00

52.90

37.00

222.00

202.90

187.00

72.00

52.90

37.00

272.00 105.00 305.00

252.90

237.00

85.90

70.00

I

285.90

270.00

* D 4 = 49.50

J

K

B10-M: 12-15

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm )

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-F: 7

BORING | Master Shanks with MVS Connection

CAT Master Shanks with Imperial Threads

A

X 1

L 1

L 2

B

D 10

D 3

D 4

D 5

C

D 9

D

Connection

Shank

Taper Size

D 4 | D 3 40 - 22 50 - 28 25 - 14 25 - 14 32 - 18 32 - 18 40 - 22 40 - 22 50 - 28 50 - 28 63 - 36 63 - 36 40 - 22 40 - 22 50 - 28 50 - 28* 50 - 28 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36

Weight

Part No. 353001 353002 353011 353012 353013 353014 353003 353015 353004 353016 353005 353017 353006 353018 353007 353025 353019 353008 353023 353020 353009 353024 353021 353010 353022

X 1

L 1

L 2

D 5

D 9

D 10

1/2 - 13 1/2 - 13 5/8 - 11 5/8 - 11 5/8 - 11 5/8 - 11 5/8 - 11 5/8 - 11 5/8 - 11 5/8 - 11 5/8 - 11 5/8 - 11

30 30 40 40 40 40 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50 50 50

2.362 2.756 2.165 5.551 2.559 6.732 2.165 6.378 2.441 5.394 3.228 6.181 2.165 6.378 2.441 7.953 7.953 2.835 8.740 8.740 2.835

1.612 2.006 1.415 4.800 1.809 5.982 1.415 5.628 1.691 4.644 2.478 5.431 1.415 5.628 1.691 7.203 7.203 2.085 7.990 7.990 2.085 9.959 9.959 3.384

- -

- -

- -

1.322 (lbs) 1.763 (lbs) 2.204 (lbs) 3.306 (lbs) 2.425 (lbs) 4.188 (lbs) 2.491 (lbs) 5.511 (lbs) 2.821 (lbs) 5.291 (lbs) 4.034 (lbs) 7.936 (lbs) 7.297 (lbs) 9.920 (lbs) 7.583 (lbs) 11.680 (lbs) 14.100 (lbs) 8.223 (lbs) 15.650 (lbs) 20.500 (lbs) 9.413 (lbs) 26.230 (lbs) 31.300 (lbs) 13.600 (lbs) 39.460 (lbs)

E

0.787 4.173 1.181 5.354 0.787

-

1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 2.750 2.750 2.750 2.750 2.750 2.750 2.750 2.750 2.750 2.750 2.750 2.750 2.750

1.102

-

1.378

-

F

-

1.850

-

-

-

-

-

-

-

-

G

0.787 5.000 1.063 6.575 6.575 1.457 7.362

-

1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8 1 - 8

1.850

- -

2.362

H

- -

-

3.071

-

-

10.709 10.709

- -

-

I

3.543

100 - 56 100 - 56

4.134

-

-

12.008

11.258

-

-

* D 4 = 49.50

J

K

B10-M: 12-15

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm )

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-F: 8

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

CAT Master Shanks with Metric Threads

A

X 1

L 1

L 2

B

D 4 D 9

D 10

D 3

C

D

Connection

Shank

Taper Size

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

Weight 1.30 (kg) 1.80 (kg) 3.40 (kg) 3.70 (kg) 4.20 (kg) 5.20 (kg)

Part No.

X 1

L 1

L 2

D 9

D 10

132022T016960 132066T016960 132022T016962 132066T016962 132088T016962 132076T016962

40 40 50 50 50 50

62.00 82.00 62.00 72.00 72.00

42.90 62.90 42.90 52.90 52.90 85.90

- -

44.45 44.45 69.85 69.85 69.85 69.85

M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3

E

27.00 37.00

- -

105.00

F

G

H

I

J

K

B10-M: 12-15

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm )

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-F: 9

BORING | Master Shanks with MVS Connection

Dual Contact SK Master Shanks (DIN 69871-AD / B-D)

A

X 1

L 1

B

D 4

D 10

D 3

C

D

Connection

Shank

Taper Size

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

Weight

Part No. 353064 353065 353066 353067 353068 353069 353064 353065 353066 353067 353068 353069

X 1

L 1

D 10

40 40 50 50 50 50 40 40 50 50 50 50

1.811 2.598 1.811 2.205 2.205 3.543 46.00 66.00 46.00 56.00 56.00 90.00

1.059 1.846 1.059 1.453 1.453 2.791 26.90 46.90 26.90 36.90 36.90 70.90

M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3

2.426 (lbs) 6.395 (lbs) 6.395 (lbs) 7.056 (lbs) 8.159 (lbs) 11.687 (lbs)

E

1.10 (kg) 1.50 (kg) 2.90 (kg) 3.20 (kg) 3.70 (kg) 5.30 (kg)

F

G

H

I

J

K

B10-M: 12-15

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm )

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-F: 10

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

SK Master Shanks (DIN 69871-AD / B-D) Balanced

A

X 1*

X 1

L 1

L 1

D 3 D 4 D 5

B

D

D 5

10

D 3 D 4

L 2

*X 1 : with one piece clamping nut

C

Connection

Shank

Taper Size

D 4 | D 3 40 - 22 50 - 28 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 50 - 28 50 - 28* 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 100 - 56 100 - 56 ER 40 40 - 22 50 - 28 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 50 - 28 50 - 28* 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 ER 40 100 - 56 100 - 56 ER 40

Weight

Part No. 327001 327002 327003 327004 327005 327006 327007 327017 327025 327033 327018 327026 327034 327010 327027 327011 327028 327001 327002 327003 327004 327005 327006 327007 327017 327025 327033 327018 327026 327034 327010 327027 327011 327028

X 1

L 1

L 2

D 5

D 10

30 30 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50 30 30 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50

1.811 2.283 2.165 1.811 1.811 2.598 2.598 3.149 1.811 7.323 7.323 2.205 8.110 8.110 2.205

1.059 1.531 1.413 1.059 1.059 1.846 1.846 2.397 1.059 6.571 6.571 1.453 7.358 7.358 1.453 9.327 2.791 26.90 38.90 35.90 26.90 26.90 46.90 46.90 60.90 26.90 10.665 2.173 166.90 166.90

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

- -

M12 x 1.75

1.103 (lbs)

M12 x 1.75 1.764 (lbs)

D

1.575

M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M24 x 3

2.426 (lbs) 2.205 (lbs) 2.426 (lbs) 3.087 (lbs) 4.190 (lbs) 2.860 (lbs) 6.395 (lbs)

- - - -

E

259079**

4.566

2.480

-

2.362

M24 x 3 13.230 (lbs) M24 x 3 10.805 (lbs)

- -

M24 x 3

7.056 (lbs)

F

3.071

M24 x 3 19.625 (lbs) M24 x 3 15.215 (lbs)

- -

M24 x 3

8.159 (lbs)

10.079

3.543

M24 x 3 29.988 (lbs) M24 x 3 11.687 (lbs) M24 x 3 37.706 (lbs)

G

3.543

- -

11.417

259080**

3.149

5.275

2.480

M24 x 3

6.834 (lbs)

46.00 58.00 55.00 46.00 46.00 66.00 66.00 80.00 46.00

- -

M12 x 1.75 0.50 (kg) M12 x 1.75 0.80 (kg)

H

40.00

M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3

1.10 (kg) 1.00 (kg) 1.10 (kg) 1.40 (kg) 1.90 (kg) 1.30 (kg) 2.90 (kg) 6.00 (kg) 4.90 (kg) 3.20 (kg) 8.90 (kg) 6.90 (kg) 3.70 (kg) 13.60 (kg) 5.30 (kg) 17.10 (kg) 3.10 (kg)

- - - -

I

259079**

116.00

63.00

-

186.00 186.00

60.00

- -

56.00

36.90

J

206.00 206.00

186.90 186.90

78.00

- -

56.00

36.90

256.00

236.90

90.00

90.00

70.90

- -

K

290.00

270.90

259080**

ER 40

80.00

55.20

134.00

63.00

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg * D 4 = (49.50 mm) **Balanced without clamping nut

= Imperial (in) = Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-F: 11

BORING | Master Shanks with MVS Connection

Dual Contact BT Master Shanks (JIS B 6339)

A

X 1

L 1

B

D 4

D 10

D 3

C

D

Connection

Shank

Taper Size

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

Weight

Part No. 353070 353071 353072 353073 353074 353075 353070 353071 353072 353073 353074 353075

X 1

L 1

D 10

40 40 50 50 50 50 40 40 50 50 50 50

2.126 2.520 2.559 2.953 2.953 3.543 54.00 64.00 65.00 75.00 75.00 90.00

1.063 1.457 1.055 1.449 1.449 2.039 27.00 37.00 26.80 36.80 36.80 51.80

M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3

2.646 (lbs) 3.308 (lbs) 8.820 (lbs) 9.261 (lbs) 10.584 (lbs) 12.128 (lbs)

E

1.20 (kg) 1.50 (kg) 4.00 (kg) 4.20 (kg) 4.80 (kg) 5.50 (kg)

F

G

H

I

J

K

B10-M: 12-15

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm )

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-F: 12

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

BT Master Shanks (JIS B 6339) Balanced

A

X 1

L 1

B

D 10

D 3 D 4

D 3 D 4 D 5

C

X 1*

L 1

D

D 5

E

*X 1 : with one piece clamping nut

L 2

Connection

Shank

Taper Size

D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56 40 - 22 50 - 28 40 - 22 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56 ER 40 ER 40 ER 40

Weight

Part No. 327012 327013 327016 327019 327020 259081* 327021 327022 327023 327024 259082* 327012 327013 327016 327019 327020 259081* 327021 327022 327023 327024 259082*

X 1

L 1

L 2

D 5

D 10

F

30 30 40 40 40 40 50 50 50 50 50 30 30 40 40 40 40 50 50 50 50 50

1.575 1.811 1.811 2.126 2.520 2.755 2.559 2.953 2.953 3.543 3.149 40.00 46.00 46.00 54.00 64.00 70.00 65.00 75.00 75.00 90.00 80.00

0.710 0.945 0.750 1.060 1.457 1.692 1.060 1.450 1.450 2.039 1.645 18.00 24.00 19.00 27.00 37.00 43.00 26.80 36.80 36.80 51.80 41.80

- - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - -

M12 x 1.75 M12 x 1.75

1.102 (lbs) 1.323 (lbs) 2.425 (lbs) 2.646 (lbs) 3.307 (lbs) 2.645 (lbs) 8.599 (lbs) 9.261 (lbs) 10.363 (lbs) 12.127 (lbs) 8.377 (lbs)

M16 x 2 M16 x 2 M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M16 x 2 M16 x 2 M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3

G

4.094

2.480

H

5.314

2.480

M12 x 1.75 M12 x 1.75

0.50 (kg) 0.60 (kg) 1.10 (kg) 1.20 (kg) 1.50 (kg) 1.20 (kg) 3.90 (kg) 4.20 (kg) 4.70 (kg) 5.50 (kg) 3.80 (kg)

I

104.00

63.00

J

ER 40

135.00

63.00

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg *Balanced without clamping nut

K

B10-M: 12-15

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm )

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-F: 13

BORING | Master Shanks with MVS Connection

NMTB Master Shanks

A

X 1

L 1

B

D 9

D 3 D 4

C

D

Connection

Shank

Taper Size

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56

Weight

Part No.

X 1

L 1

D 9

5/8 - 11 5/8 - 11

132022T004498 132066T004498 132022T004480 132066T004480 132088T004480 132076T004480 132022T004498 132066T004498 132022T004480 132066T004480 132088T004480 132076T004480

40 40 50 50 50 50 40 40 50 50 50 50

1.496 1.890 1.654 2.047 2.047 3.543 38.00 48.00 42.00 52.00 52.00 90.00

1.039 1.433 1.060 1.450 1.450 2.945 26.40 36.40 26.80 36.80 36.80 74.80

2.900 (lbs) 3.300 (lbs) 6.600 (lbs) 7.700 (lbs) 8.800 (lbs) 10.800 (lbs)

E

1 - 8 1 - 8 1 - 8 1 - 8

5/8 - 11 5/8 - 11

1.30 (kg) 1.50 (kg) 3.00 (kg) 3.50 (kg) 4.00 (kg) 4.90 (kg)

F

1 - 8 1 - 8 1 - 8 1 - 8

G

H

I

J

K

B10-M: 12-15

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm )

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-F: 14

www.alliedmachine.com | 1.330.343.4283

BORING | Master Shanks with MVS Connection

Imperial Straight Master Shanks

A

L 1

L 7

B

D 3 D 4

D 1

C

P 1

D

Shank

Connection

D 4 | D 3 40 - 22 50 - 28 63 - 36 80 - 36

Weight

Part No. K71547 K71548 K71549 K71550

L 7

D 1

P 1

L 1

3-1/2

1-1/4 1-1/2

1/8-27 NPTF 1/4-18 NPTF 1/4-18 NPTF 1/4-18 NPTF

5.080 5.810 6.700 6.700

1.764 (lbs) 3.086 (lbs) 5.952 (lbs) 7.716 (lbs)

4

E

4-1/2 4-1/2

2 2

F

G

H

I

J

K

B10-M: 12-15

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm )

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

www.alliedmachine.com | 1.330.343.4283

B10-F: 15

BORING | Master Shanks with MVS Connection

DIN 2080 Master Shanks

A

X 1

L 1

B

D 9

D 3 D 4

C

X 1*

L 1

D

D 5

D 9

L 2

*X 1 : with one piece clamping nut

E

Connection

Shank

Taper Size

D 4 | D 3 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56 50 - 28 63 - 36 50 - 28 63 - 36 80 - 36 100 - 56 ER 40

Weight

Part No.

X 1

L 1

L 2

D 5

D 9

132022T010229 132066T010229 132022T003704 132066T003704 132088T003704 132076T003704 132022T010229 132066T010229 132022T003704 132066T003704 132088T003704 132076T003704 259084

40 40 50 50 50 50 50 40 40 50 50 50 50 50

1.496 1.889 1.653 2.047 2.047 3.543 3.149 38.00 48.00 42.00 52.00 52.00 90.00 80.00

1.039 1.433 1.055 1.448 1.448 2.945 2.551 26.40 36.40 26.80 36.80 36.80 74.80 64.80

- - - - - - - - - - - -

- - - - - - - - - - - -

M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3

2.866 (lbs) 3.306 (lbs) 6.613 (lbs) 7.716 (lbs) 8.818 (lbs) 10.800 (lbs) 7.275 (lbs)

F

G

5.276

2.480

1.30 (kg) 1.50 (kg) 3.00 (kg) 3.50 (kg) 4.00 (kg) 4.90 (kg) 3.30 (kg)

H

259084

ER 40

134.00

63.00

I

J

K

B10-M: 12-15

B10: vi-vii

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

= Imperial (in) = Metric (mm )

25-14 32-18

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight Factory technical assistance is also available for specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank) WARNING

M

-When using Alu-Line components, do not exceed recommended 5xD length-to-diameter ratio -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio -When using a NOVI TECH module, do not exceed recommended 10xD length-to-diameter ratio -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio Factory technical assistance is available for your specific applications through our Application Engineering department. ext: 7611 | email: appeng@alliedmachine.com

INDEX

B10-F: 16

www.alliedmachine.com | 1.330.343.4283

Made with FlippingBook flipbook maker