B10-WHL_EU-EN

BORING | Rough Machining

Twin CuƩers Same Level 90° | Diameter Range: 29.00 mm - 103.00 mm

A

X 1

X 2

B

90°

A

D 2 D 1 D 5

D 2 D 1

C

D

ConnecƟon Boring Range

Twin CuƩer

Part No.

D 2 | D 1 25 - 14 25 - 14 32 - 18 32 - 18 32 - 18 40 - 22 40 - 22 40 - 22 40 - 22 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36

A

X 1

X 2

D 5

Weight 0.20 (kg) 0.20 (kg) 0.40 (kg) 0.40 (kg) 0.40 (kg) 0.70 (kg) 0.70 (kg) 0.70 (kg) 0.70 (kg) 1.10 (kg) 1.10 (kg) 1.90 (kg) 1.90 (kg) 1.90 (kg)

Insert Form Insert Holder Serrated Body

151001 151002 151002 151023 151003 151023 151003 151024 151004 151025 151005 151026 151086 151006

148001 148002 148017 148003 148003 148018 148018 148004 148004 148005 148005 148006 148006 148006

29.00 - 37.00 36.00 - 44.00 36.00 - 44.00 43.00 - 54.00 43.00 - 54.00 43.00 - 54.00 43.00 - 54.00 53.00 - 66.00 53.00 - 66.00 65.00 - 83.00 65.00 - 83.00 82.00 - 103.00 82.00 - 103.00 82.00 - 103.00

56.00 56.00 56.00 66.00 66.00 66.00 66.00 75.00 75.00 75.00 75.00 90.00 90.00 90.00

42.00 42.00 42.00 46.00 46.00 46.00 46.00 55.00 55.00 55.00 55.00 60.00 60.00 60.00

-

103 103 103 103 104 103 104 103 104 103 104 103 104 105

30.00 30.00 36.00 36.00 36.00 36.00

E

F

- - - - - - -

G

NOTE : Insert holders sold in quanƟƟes of 1, and inserts sold separately.

H

I

J

K

L

B10-M: 12-13

B10-D: 23

B10-F

B10-H

B10: VI-VII

M

Key on B10-D: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

Inserts sold separately = Metric (mm)

IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended applicaƟon-specific parameters. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-D: 7