B10-WHL_EU-EN

BORING | Intermediate Modules

NOVI TECH® VibraƟon Damping Intermediate Modules Machining Diameter: 50.00 mm - 205.00 mm

A

X 1

B

D 3 D 4

D 2 D 1

C

X 1

L 1

D

D 4

D 2

D 1

D 3

E

MVS ConnecƟon

NOVI TECH

F

D 2 | D 1 50 - 28* 63 - 36 80 - 36 80 - 36 100 - 56

D 4 | D 3 40 - 22 50 - 28 63 - 36 80 - 36 80 - 36

X 1

L 1

Weight 2.80 (kg) 5.70 (kg) 7.50 (kg) 7.50 (kg) 9.90 (kg)

Part No. 519002 519003 519004 519005 519006

200.00 200.00 200.00 200.00 200.00

- - - -

G

182.00

* D 2 =49.50 mm

H

I

J

B10-M: 12-13

B10-F

B10: VI-VII

Key on B10-E: 1

K

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm) IMPORTANT: Max spindle speed refers to maximum possible speed for an individual boring head and is not a recommended parameter. Refer to page B10-M: 12 for recommended applicaƟon-specific parameters. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent:

L

M

-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com

B10-E: 5