B10-WHL_EU-EN

BORING | Master Shanks with MVS ConnecƟon

HSK Master Shanks (DIN 69893) Balanced

A

X 1

L 1

B

D 3 D 4 D 5

D 3 D 4

D

X 1*

C

L 1

D 5

D

D

*X 1 : with one piece clamping nut

L 2

E

Taper Size

ConnecƟon

Shank

D

D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 25 - 14 32 - 18 40 - 22 50 - 28 63 - 36 80 - 36 50 - 28 50 - 28 50 - 28* 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36 ER 40

X 1

L 1

L 2

D 5

Weight 0.40 (kg) 0.70 (kg) 0.60 (kg) 0.80 (kg) 0.70 (kg) 0.80 (kg) 0.80 (kg) 1.10 (kg) 1.50 (kg) 2.10 (kg) 1.70 (kg) 2.40 (kg) 5.00 (kg) 4.00 (kg) 2.90 (kg) 7.80 (kg) 7.80 (kg) 3.70 (kg) 12.60 (kg) 10.40 (kg) 5.00 (kg) 17.50 (kg) 3.50 (kg)

Part No. 246016 246004 246015 245011 246012 246013 246014 245012 245013 246009 245014 246020 246021 245015 246019 246022 245016 246018 246023 246010 246017 252090** 252091**

40 40 50 50 63 63 63 63 63 63 63

56.00 70.00 56.00 65.00 46.00 56.00 56.00 65.00 80.00 80.00

- -

- - - - - - - - - - - - - - - - - - - - -

- - - - - - - - - -

30.00

F

-

20.00 30.00 30.00 39.00

G

- -

120.00

94.00 36.00

95.00

63.00

100 100 100 100 100 100 100 100 100 100 100 100

65.00

-

180.00 180.00

151.00 151.00

60.00

H

- -

80.00

51.00

205.00 205.00

176.00 176.00

78.00

- -

80.00

51.00

255.00 255.00 100.00 300.00 120.00

226.00 226.00

90.00

I

- - -

100 - 56 100 - 56

-

221.00

ER 40

91.00

88.00

63.00

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. * D 4 = 49.50 mm **Balanced without clamping nut.

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

B10-F: 4

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com