B10-WHL_EU-EN

BORING | Master Shanks with MVS Connection

BT Master Shanks (JIS B 6339) Balanced

A

X 1

L 1

B

D 10

D 3 D 4

D 3 D 4 D 5

C

X 1*

L 1

D

D 10

D 5

*X 1 : with one piece clamping nut

L 2

E

Connection

Shank

Taper Size

D 4 | D 3 40 - 22 50 - 28 40 - 22 50 - 28 63 - 36 50 - 28 50 - 28 50 - 28 63 - 36 63 - 36 63 - 36 80 - 36 80 - 36 80 - 36 100 - 56 100 - 56 ER 40

X 1

L 1

L 2

D 5

D 10

Weight 0.50 (kg) 0.60 (kg) 1.10 (kg) 1.20 (kg) 1.50 (kg) 1.20 (kg) 3.90 (kg) 7.00 (kg) 5.90 (kg) 4.20 (kg) 9.90 (kg) 7.80 (kg) 4.70 (kg) 14.80 (kg) 14.80 (kg) 5.50 (kg) 17.30 (kg) 3.80 (kg)

Part No. 327012 327013 327016 327019 327020 259081 * 327021 327029** 327036** 327030** 327037** 327031** 327038** 327032** 259082* 327022 327023 327024

30 30 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50 50

40.00 46.00 46.00 54.00 64.00 70.00 65.00

18.00

- - - - - - - - - - - - - - - -

- - - - -

M12 x 1.75 M12 x 1.75

-

F

19.00 27.00

M16 x 2 M16 x 2 M16 x 2 M16 x 2 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3 M24 x 3

-

43.00 26.80

104.00

63.00

-

G

205.00 205.00

166.80 166.80

60.00 49.50

75.00

36.80

-

225.00 225.00

186.80 186.80

78.00

- -

75.00

36.80

H

275.00 275.00

236.80 236.80

90.00

- - -

90.00

-

290.00

251.80

ER 40

80.00

41.80

135.00

63.00

I

NOTE : Balanced refers to a specific residual imbalance of ≤4.00 gmm/kg. *Balanced without clamping nut. **Available upon request.

J

K

B10-M: 12-13

B10: VI-VII

Key on B10-F: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm )

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitations. -Refer to example on page B10-M: 11 for calculating tool assembly weight. Factory technical assistance is also available for specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter ratio or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter ratio. -When using tool steel components, do not exceed recommended 6xD length-to-diameter ratio. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter ratio.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter ratio. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter ratio. -Refer to examples on pages B10-M: 8-10 for calculating length-to-diameter ratio. Factory technical assistance is available for your specific applications through our Application Engineering department. email: engineering.eu@alliedmachine.com

INDEX

B10-F: 10

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com