B10-WHL_EU-EN

BORING | Large Diameter Boring

Alu-Line Basic D 40 Serrated Slides Diameter Range: 200.00 mm - 520.00 mm

A

A

30 mm

X 1

B

D 5

L 4

C

L 5

D

ConnecƟon

Boring Range

Serrated Slide

D 5

A

X 1

L 4

L 5

Weight 2.80 (kg) 3.80 (kg) 5.00 (kg) 6.00 (kg)

Part No. 349021 349022 349023 349024

D 40 D 40 D 40 D 40

200.00 - 280.00 280.00 - 360.00 360.00 - 440.00 440.00 - 520.00

75.00 75.00 75.00 75.00

190.00 270.00 350.00 430.00

80.00 80.00 80.00 80.00

E

F

G

H

I

J

K

B10-M: 12-13

B10-G: 22

B10-G: 16-19

B10-H

B10: VI-VII

Key on B10-G: 1

19.5-22 22-11

40-22 50-28 63-36 80-36 100-56

25-14 32-18

= Metric (mm)

L

Exceeding weight capacity for machine tool spindle and tool changer can cause machine damage and/or serious injury. To prevent: -Consult machine tool builder for machine's weight limitaƟons. -Refer to example on page B10-M: 11 for calculaƟng tool assembly weight. Factory technical assistance is also available for specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com WARNING Tool failure can cause serious injury. To prevent: -Do not exceed recommended 10xD length-to-diameter raƟo or exceed 4 total components (including shank). WARNING

M

-When using Alu-Line® components, do not exceed recommended 5xD length-to-diameter raƟo. -When using tool steel components, do not exceed recommended 6xD length-to-diameter raƟo. -When using heavy metal components, do not exceed recommended 8xD length-to-diameter raƟo.

-When using a carbide shank, do not exceed recommended 9xD length-to-diameter raƟo. -When using a NOVI TECH ® module, do not exceed recommended 10xD length-to-diameter raƟo. -Refer to examples on pages B10-M: 8-10 for calculaƟng length-to-diameter raƟo. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department. email: engineering.eu@alliedmachine.com

INDEX

B10-G: 4

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com