AMPC-D_EU-EN

BURNISHING | S.C.A.M.I.® Roller Burnishing Systems

Diameter Adjustment

A

Release Spring

Micrometer Nut

Micrometer Sleeve

DRILLING

Cone

B

Rolls

Adjustment Housing

Lock Nut

BORING

Adjustment The roller burnishing tool incorporates a shank, a body, and a planetary system of conical rolls that are evenly spaced by a retaining cage. 1. Unscrew the lock nut. 2. Pull the housing toward the lock nut and rotate to increase or decrease the diameter. 3. Tighten the lock nut. IMPORTANT: As you increase the diameter, the cone moves forward, pushing the rolls outward. Because of this, the cone will protrude from the end of the cage, decreasing the clearance available in blind holes (see Figures 1 and 2). Refer to chart below for clearance values.

C

REAMING

Figure 1

Figure 2

Through Hole Tool

Blind Hole Tool

D

BURNISHING

Inclination of the rolls

C

C

Larger Diameter = Extruded Cone = Decreased Clearance

E

THREADING

Clearance (C)

Adjustment Range

Through Holes

Blind Holes

Metric (mm) 4.70 - 5.88 5.89 - 9.47 9.48 - 15.84 15.85 - 28.54 28.55 - 46.70 46.71 - 84.80 84.81 - 165.90

Imperial (inch) 0.1850 - 0.2315 0.2319 - 0.3728 0.3732 - 0.6236 0.6240 - 1.1236 1.1240 - 1.8385 1.8390 - 3.3386 3.3390 - 6.5315

Rolls 701

Rolls 704 / 707

Rolls 708

- - -

2.40 2.40 2.40 3.20 3.20 4.00 4.70

-

0.60 0.60 1.00 1.00 1.00 1.00

5.40 9.50 9.50

X

10.30

SPECIALS

D: 40

www.alliedmachine.com | +44 (0) 1384 400 900 | enquiries.eu@alliedmachine.com