Reaming Product Catalog

REAMING | ALVAN® Reaming Systems by S.C.A.M.I. | Replaceable Head Reamers | 9000 Series

Recommended Drilling Data | Imperial (in)

9000 SERIES

Speed (SFM)

Uncoated Carbide

Coated Carbide 197 - 262 131 - 230 197 - 262 131 - 230 197 - 262 131 - 230 131 - 197 197 - 394 197 - 394 197 - 262 131 - 230 197 - 262 131 - 230

Hardness (BHN) 100 - 180 180 - 250 85 - 180 180 - 275 125 - 180 180 - 325 125 - 180 180 - 375 240 - 450 125 - 180 180 - 350 150 - 200 200 - 250

ISO Material

Cermet

Free-Machining Steel 1118, 1215, 12L14, etc.

33 - 66 23 - 49 33 - 66 23 - 49 33 - 66 23 - 49 20 - 33 13 - 26 13 - 26 33 - 66 23 - 49 33 - 66 23 - 49

295 - 984 262 - 656 295 - 984 262 - 656 295 - 984 262 - 656 164 - 197

Low-Carbon Steel 1010, 1020, 1025, 1522, 1144, etc. Medium-Carbon Steel 1030, 1040, 1050, 1527, 1140, etc.

Alloy Steel 4140, 5140, 8640, etc. High-Strength Alloy 4340, 4330V, 300M, etc. Structural Steel A36, A285, A516, etc. Tool Steel H-13, H-21, A-4, S-3, etc. Stainless Steel 400 Series 416, 420, etc. Stainless Steel 300 Series 304, 316, 17-4PH, etc.

P

— —

C30

295 - 984 262 - 656 295 - 984 262 - 656

135 - 350

20 - 33

131 - 197

164 - 197

M

135 - 275

20 - 33

131 - 197

164 - 197

Grey and Ductile Cast Iron, Spheroidal Cast Iron (Pearlitic)

< 200 > 200

66 - 131 49 - 98

394 - 656 394 - 656

— —

K

Spheroidal Cast Iron (Ferritic)

260 - 320

33 - 49

—

295 - 459

Copper and Alloys, and Brass

< 500

197 - 656

328 - 656

—

Bronze, and Bronze Phosphorous

< 180

66 - 131

262 - 525

328 - 984

N

Aluminum and Alloys

< 150

66 - 328

—

—

High-Temp Alloy Hastelloy® B, Inconel® 600, etc.

140 - 310

20 - 33

49 - 98

—

S

Titanium Alloy

140 - 310

20 - 33

49 - 98

—

Formulas 1. RPM

= (3.82 • SFM) / DIA

2. IPM

= RPM • IPR

where: RPM

where: IPM = inches per minute (in/min) RPM

= revolutions per minute (rev/min)

SFM DIA

= speed (ft/min)

= revolutions per minute (rev/min)

= diameter of drill (inch) 3. SFM = RPM • 0.262 • DIA where: SFM = speed (ft/min) RPM

IPR

= feed rate (in/rev)

= revolutions per minute (rev/min)

DIA

= diameter of drill (inch)

IMPORTANT: The speeds and feeds listed above are a general starting point for all applications. Factory technical assistance is available through our Application Engineering department.

C30: 27

www.alliedmachine.com | 1.330.343.4283