CAT-SET

Reference Icons The following icons will appear throughout the catalog to help you navigate between products.

Table of Contents

IntroducƟon InformaƟon Product Overview. . . . . . . . . . . . . . . . . . . .................... 3 Product Nomenclature. . . . . . . . . . . . . . . . . .................. 4 Monobloc Reamers 2441 Series . . . . . . . . . . . . . . . . . . . . . . ...................... 5 3620 Series . . . . . . . . . . . . . . . . . . . . . . ...................... 6 3627 Series . . . . . . . . . . . . . . . . . . . . . . ...................... 7 2431 Series . . . . . . . . . . . . . . . . . . . . . . ...................... 8 3610 Series . . . . . . . . . . . . . . . . . . . . . . ...................... 9 3617 Series . . . . . . . . . . . . . . . . . . . . . ...................... 10 Technical InformaƟon Setup InformaƟon . . . . . . . . . . . . . . . . . . .................... 11 Recommended Drilling Data Metric (mm) . . . . . . . . . . . . . . . . . . . .................... 13 Imperial (in). . . . . . . . . . . . . . . . . . . . .................... 15 Stock Allowance and Coolant Metric (mm) . . . . . . . . . . . . . . . . . . . .................... 17 Imperial (in). . . . . . . . . . . . . . . . . . . . .................... 18

Setup / Assembly InformaƟon Detailed instrucƟons and informaƟon regarding the corresponding part(s). Recommended Cuƫng Data Speed and feed recommendaƟons for opƟmum and safe drilling. Modular ConnecƟon Shanks Refers to Cerit modular shanks that can connect with reamers. Coolant-Through OpƟon Indicates that the product is coolant through.

Your safety and the safety of others is very important. This catalog contains important safety messages. Always read and follow all safety precauƟons. This triangle is a safety hazard symbol. It alerts you to potenƟal safety hazards that can cause tool failure and serious injury. When you see this symbol in the catalog, look for a related safety message that may be near this triangle or referred to in the nearby text. There are safety signal words also used in the catalog. Safety messages follow these words: WARNING means that failure to follow the precauƟons in this message could result in tool failure and serious injury. NOTICE means that failure to follow the precauƟons in this message could result in damage to the tool or machine but not result in personal injury. NOTE and IMPORTANT are also used. These are important that you read and follow but are not safety-related.

Visit www.alliedmachine.com for the most up-to-date informaƟon and procedures.

C20: 2