CAT-SET

REAMING | ALVAN® Reaming Systems by S.C.A.M.I. | Replaceable Head Reamers | 7000 Series

Setup Information

Fixed Head Style

Recommended Tightening Torque Metric

Imperial

D 1 Range (mm) 11.800 - 14.609 14.610 - 17.609 17.610 - 21.609 21.610 - 26.609 26.610 - 32.609 32.610 - 40.609 40.610 - 50.609 50.610 - 60.609

D 1 Range (inch) Torque (in-lbs)

Torque (N·m)

2.5 3.5 5.0 7.0

0.4646 - 0.5751 0.5752 - 0.6932 0.6933 - 0.8507 0.8508 - 1.0475 1.0476 - 1.2838 1.2839 - 1.5987 1.5988 - 1.9924 1.9925 - 2.3862

22.13 30.98 44.25 61.96 88.51

10.0 12.0 16.0 20.0

106.21 141.61 177.01

Tolerance: Fixed reamers are manufactured at 2/3 of the tolerance.

C30

Expandable Head Style

Expanding Heads Adjustment When the size reaches its lower tolerance, the head can be adjusted to compensate for wear to the cutting edges. This operation can be repeated several times until the surface finish of the hole deteriorates to an unacceptable level. Adjustment Procedure Slowly turn the right-hand threaded screw clockwise while checking the diameter setting of the reamer with a micrometer. When the required diameter is achieved, the tool is ready for use.

Tolerance: Expandable reamers are manufactured to the middle of the tolerance.

Replaceable Head Reamer 7000 Series Assembly Fixed and Expandable Styles

Step 1: Insert the replaceable reamer head into the mandrel.

Step 2: Insert the screw into the reamer head opening to secure it to the mandrel.

Step 3: Tighten the screw.

NOTE: We recommend lubricating the thread and the conical surface of contact between the reamer head and the screw with antifriction MOLYKOTE® grease.

C30: 13 - 16

C30: 6 - 7

C30: 8 - 9

C30: 10 - 11

Key on C30: 2

www.alliedmachine.com | 1.330.343.4283

C30: 12