CAT-SET

REAMING | ALVAN® Reaming Systems by S.C.A.M.I. | Replaceable Head Reamers | 5000 Series

Setup InformaƟon

Expandable Head Style

Expanding Heads Adjustment When the size reaches its lower tolerance, the head can be adjusted to compensate for wear to the cuƫng edges. This operaƟon can be repeated several Ɵmes unƟl the surface finish of the hole deteriorates to an unacceptable level.

Tolerance: Expandable reamers are manufactured to the middle of the tolerance.

C30

Replaceable Head Reamer 5000 Series Assembly

Step 1: Carefully clean the connecƟng

Step 2: Tighten the replaceable head down with a wrench unƟl the flat surface of the head is in complete contact with the mandrel.

Step 3: Compensate for wear by adjusƟng the front expansion screw while using a wrench to keep the head sƟll.

surfaces and insert the replaceable reamer head into the mandrel. Screw it in by hand clockwise.

C30: 35 - 38

C30: 32

C30: 33

Key on C30: 2

www.alliedmachine.com | 1.330.343.4283

C30: 34