CAT-SET

SPECIALS | Special Tooling SoluƟons

Engineered Specials Guided T-A®

Guided T-A Highlights • Two adjustable Torx® PLUS screw pins allow for diameter adjustment to reduce TIR.

• Provides improved tool life and hole finish. • Guided wear pads improve hole straightness.

• Coolant-through design with mulƟple coolant outlets along the drill holder provides stability in deep hole drilling applicaƟons and also improves chip evacuaƟon.

X20

Industry ApplicaƟon AutomoƟve

Industry ApplicaƟon Aerospace

Triple Coolant Outlets • AddiƟonal coolant outlets help keep the holder straight and precise. • Longer holders experience and maintain increased stability in deeper holes.

Locate the two adjustable Torx® PLUS screws (one on each side).

Loosen each screw.

Adjust insert posiƟon.

Tighten each screw.

The Proof is in the Numbers The following results came from a real-life applicaƟon that uƟlized the Guided T-A. The customer was experiencing a high scrap rate and needed to find a soluƟon to eliminate the problem.

Number of Holes Drilled: ONE CompeƟng Insert & Holder

Number of Holes Drilled: ONE Allied Machine Special Insert & Holder

80

160

240

80

160

240

320

320

400

480

In this applicaƟon, Allied Machine: • Eliminated $240,000 in scrap per year. • OpƟmized the chip formaƟon. • Enhanced the chip evacuaƟon. • Provided excellent surface finish. INCREASED tool life by 280 %

560

640

720

800

880

960

Our Chips

Their Chips

1040

1120

1220

X20: 15

www.alliedmachine.com | 1.330.343.4283