CAT-SET

DRILLING | GEN3SYS® XT Pro and XT High PenetraƟon Replaceable Insert Drilling System

Drilling System InformaƟon

GEN3SYS XT Pro

Advanced Design CapabiliƟes The advanced XT Pro insert combines a coaƟng and geometry specifically designed to achieve opƟmal results in ISO material drilling applicaƟons. With quick connecƟvity to exisƟng GEN3SYS drill insert holders, the XT Pro insert can be interchanged with previous XT inserts with ease, resulƟng in minimal setup Ɵmes so you can immediately increase your producƟvity.

GEN3SYS XT Pro Drill Inserts

A20

XT Pro Inserts Connect with:

XT Pro holders

GEN3SYS holders

K - Cast Irons • Uniquely designed for cast/nodular iron applicaƟons. • Geometry includes a corner radius for improved hole finish and heat dispersion. • Allied’s mulƟlayer AM440 coaƟng provides increased abrasion resistance and tool life. N - Nonferrous Materials • Designed for applicaƟons in aluminum, brass, and copper. • The geometry yields excellent chip control in these soŌer materials. • TiN coaƟng gives the versaƟlity to run in a variety of materials while reducing buildup.

P - Steels • Designed to provide increased penetraƟon rates and tool life in steel applicaƟons. • Superior geometry and edge provides excellent chip control. • Allied’s mulƟlayer AM420 coaƟng increases heat resistance and improves tool life. M - Stainless Steels* • Designed for all 300 series, 400 series, super duplex stainless steels, and other hard-to-machine materials in the ISO M group. • Geometry opƟmized for improved chip formaƟon while drilling at high penetraƟon rates. • Substrate chosen to provide balance of toughness and wear resistance in difficult applicaƟons. • Allied’s AM460 coaƟng provides industry-leading tool life in stainless steels. *Available in 12-32 series only.

P

K

N

M

Increased flute area

AddiƟonal coolant to the cuƫng zone

XT Pro Drill Holders

3xD, 5xD, 7xD, 10xD, 12xD

Straight flutes

Enhanced coolant inlets improve the coolant flow

Provides increased insert life

Available in 3xD, 5xD, 7xD, 10xD, and 12xD

A20: 7

www.alliedmachine.com | 1.330.343.4283