CAT-SET

DRILLING | GEN3SYS® XT Pro and XT High PenetraƟon Replaceable Insert Drilling System

11 Series: 11.00 mm - 11.99 mm (0.4331" - 0.4723") GEN3SYS XT Pro Holders

A20

Body

Shank

Part No.

L 2

L 4

L 3

L 1

L 5

D 2

Flute

Length

With Flat

Cylindrical

HXT0311S-16FM HXT0311S-16CM HXT0511S-16FM HXT0511S-16CM HXT0711S-16FM HXT0711S-16CM

3xD 36.0 62.6 64.7 112.7 48.0 16 5xD 60.0 86.6 88.6 136.7 48.0 16 7xD 83.9 110.6 112.6 160.6 48.0 16 10xD 119.9 146.6 148.6 196.6 48.0 16 12xD 143.9 170.5 172.6 220.6 48.0 16 3xD 1.416 2.457 2.537 4.412 1.875 5/8 5xD 2.361 3.401 3.481 5.356 1.875 5/8 7xD 3.305 4.345 4.425 6.300 1.875 5/8 10xD 4.721 5.761 5.841 7.716 1.875 5/8 12xD 5.665 6.705 6.785 8.660 1.875 5/8

HXT1011S-16FM HXT1211S-16FM HXT0311S-063F HXT0511S-063F HXT0711S-063F HXT1011S-063F HXT1211S-063F

HXT1011S-16CM HXT1211S-16CM HXT0311S-063C HXT0511S-063C HXT0711S-063C HXT1011S-063C HXT1211S-063C

Straight

Straight

ConnecƟon Accessories

Preset Torque Hand Driver

Admissible Tightening Torque* 50 N-cm (4.4 in-lbs)

Insert Screws 71843-IP6-1

Insert Driver

Replacement Tips

8IP-6

8IP-6TL

8IP-6B

*Tightening torques are calculated with a fricƟon coefficient of µ = 0.14 and develop 90% of ulƟmate yield strength.

Refer to Speed and Feed charts for recommended adjustments to speeds and feeds. Refer to page A20: 86 for deep hole drilling guidelines in this secƟon of the catalog. Visit www.alliedmachine.com/DeepHoleGuidelines for the most up-to-date informaƟon and procedures. Factory technical assistance is available for your specific applicaƟons through our ApplicaƟon Engineering department : appeng@alliedmachine.com . WARNING

A20: 71 - 86

A20: 7 - 10

Key on A20: 2

Screws sold in mulƟples of 10. = Metric (mm) = Imperial (in)

www.alliedmachine.com | 1.330.343.4283

A20: 14