CAT-SET

DRILLING | APX™ Drill: Deep Hole / Large Diameter Replaceable Insert Drilling System

33 Series: 33.00 mm - 37.99 mm (1.2991" - 1.4958") Heads

T-A® Style Head

APX Heads

T-A Style Head

D 1

D 3

L 9

IC Insert Size

mm inch

FracƟonal

mm inch

mm inch

Part No.

mm inch

V3300D-33 V3300D-0110 V3301D-34 V3301D-0111 V3301D-0112 V3301D-35 V3301D-0113 V3301D-36 V3301D-0114 V3301D-37 V3301D-0115

33.00 33.34 34.00 34.13 34.93 35.00 35.72 36.00 36.51 37.00 37.31

1.2992

— 16.00

0.6299 0.6299 0.7087 0.7087 0.7087 0.7087 0.7087 0.7874 0.7874 0.7874 0.7874

5.6 5.6 6.1 6.1 6.1 6.1 6.1 6.5 6.5 6.5 6.5

0.221 0.221 0.239 0.239 0.239 0.239 0.239 0.256 0.256 0.256 0.256

7.94 7.94 7.94 7.94 7.94 7.94 7.94 7.94 7.94 7.94 7.94

5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16

1.3125 1-5/16

16.00

1.3386

— 18.00

1.3438 1-11/32

18.00 18.00

1.3750 1.3780

1-3/8

— 18.00

1.4063 1-13/32

18.00

1.4173

— 20.00

A50

1.4375 1-7/16

20.00

1.4567

— 20.00

1.4688 1-15/32

20.00

Pilot Inserts

D 1 Range

D 3

T-A Style Head

mm

inch

mm

inch

Pilot Series

T-A Pro®

T-A (-TC)

TA#0-16.00 TA#1-18.00 TA#1-20.00

1C10H-16-TC 1C11H-18-TC

33.00 - 33.99 34.00 - 35.99 36.00 - 37.99

1.2991 - 1.3383 1.3384 - 1.4171 1.4172 - 1.4958

16.00 18.00 20.00

0.6299 0.7087 0.7874

0 1 1

1C11H-20-TC #: Denotes ISO material/geometry (P= steel, M= stainless steel, K= cast iron, N= nonferrous, and X= high-speed steel substrate). Please note, X is only available in T-A Pro inserts.

IC Inserts - AM300® Coated Size Geometry mm inch

Part No. P35 (C5)

Insert Driver

Admissible Tightening Torque*

Insert Screw

K35 (C1)

K25 (C2)

OP-05T308-1PW OP-05T308-PW OP-05T308-2PW

Standard High Rake

305 N-cm (27.0 in-lbs)

7.94 5/16

IS-10-1

8T-9

— — *Tightening torques are calculated with a fricƟon coefficient of µ = 0.14 and develop 90% of ulƟmate yield strength. OP-05T308-PWHR

Pilot Accessories

Series

Insert Screws 72567-IP8-1 7375-IP9-1

Insert Driver

Admissible Tightening Torque*

0 1

8IP-8 8IP-9

175 N-cm (15.5 in-lbs) 305 N-cm (27.0 in-lbs)

*Tightening torques are calculated with a fricƟon coefficient of µ = 0.14 and develop 90% of ulƟmate yield strength.

NOTE: For standard metric sized pilot inserts, please see the cross reference on pg. A50: 33 .

IC inserts sold in mulƟples of 2. Insert screws sold in mulƟples of 10.

A50: 49 - 50

A25 & A30

Key on A50: 2

For nonstocked diameters, follow the below examples: Metric 33 series, T-A (1 series), 34.25 mm

= V3301D-34.25 = V3301D-1.3400

Inch

33 series, T-A (1 series), 1.3400"

A50: 7

www.alliedmachine.com | 1.330.343.4283